16MM THICKNESS 1070 ALUMINIUM COIL

16mm-thickness-1070-aluminium-coil are wrapped in HDPE and placed on wooden pallets which have runners along and across the length of the sheet. An angle board is attached to the edges for edge protection, plyboard is placed on the top and bottom of the stack and the package is strapped with hoop iron straps. Silica gel packets are used for moisture protection.
16mm-thickness-1070-aluminium-coil Technical Properties*

*TYPICAL FILM PROPERTIES DETERMINED OVER HEAVYWEIGHT ZINC PHOSPHATE PRE-TREATMENT ON MILD STEEL SUBSTRATE ¹CORROSION RESISTANCE DETERMINED OVER XYLAR 2 PRIMER ON MILD STEEL SUBSTRATE ²CHEMICAL RESISTANCE BY SPOT TEST, OVER 24 HOURS AT ROOM TEMPERATURE

The 16mm-thickness-1070-aluminium-coil have high thermal conductivities and they tend not to lose their mechanical properties even at elevated temperature applications. They can operate up to 427 degrees Celsius temperature with stable properties in some cases. Please contact us for further information on the Aluminium Strip, foil, coil, sheet and plate products and their pricing.

16mm-thickness-1070-aluminium-coil is a good conductor of heat and electricity. When measured by equal cross-sectional area, electrical grade aluminum has conductivity which is approximately 62% of electrical grade annealed copper. However, when compared using equal weight, the conductivity of aluminum is 204% of copper.

Hot Tags: 16mm thickness 1070 aluminium coil, China 16mm thickness 1070 aluminium coil manufacturers, High plasticity, Aluminum gasket, 1 series Aluminum Coil, Aluminum coil 1100, Aluminum Coil, 1100 Aluminum Coil