Knowledge

The 6061-T651 aluminum plate is a high-strength structural material manufactured by GNEE, primarily alloyed with 0.8-1.2% magnesium and 0.4-0.8% silicon. The T651 temper indicates

The 6063 T5 aluminum elbow is a structural and fluid routing pipe fitting manufactured by GNEE to modify commercial pipeline direction. Belonging to the Al-Mg-Si alloy family, this

The 1060 aluminum elbow is a specialized pipe fitting engineered to alter fluid direction within low-pressure piping systems. Manufactured by GNEE, this commercial component utiliz

Selecting the correct aluminum elbow size for an HVAC system is a practical step that affects installation weight, pressure drop, and service life. This guide covers how aluminum p

When you specify a butt weld elbow, one of the first decisions is the bend radius. Long radius (LR) and short radius (SR) elbows look similar but behave differently in a piping sys

GNEE manufactures aluminum flanges in standard sizes up to DN350, with custom sizes available above DN350. This page provides the actual dimension tables you need to order the righ

Aluminum flanges connect pipes, valves, pumps, tanks, and other equipment in bolted, detachable joints. Unlike welded connections, flanged joints can be opened for inspection, main

Both materials make excellent pipe elbows — but they solve different problems. Aluminum wins on weight, cost and rust-free air service; stainless wins on temperature, aggressive-me

6061-T6 is the workhorse alloy for aluminum pipe fittings. 6063 is the architectural alloy for extrusions and low-stress tubing.

When sourcing structural materials, evaluating ASTM B646 aluminum is a key step for engineers. High-strength aluminum is strong, but how does it react when a small crack appears? T

Aluminum roofing sheets are replacing traditional steel roofs in many industrial, commercial, and residential buildings. The reasons are simple: aluminum is light, it does not rust

Both 3003 and 3105 belong to the 3000 series Aluminum-Manganese (Al-Mn) alloy family. Because they use manganese as their primary alloying element, they offer about 20% higher stre