Aluminium 3105 Coi
Aluminium 3105 Coi
Aluminium 3105 Coi
Aluminium 3105 Coi
Aluminium 3105 Coi

Aluminium 3105 Coi

3105 aluminum coil belongs to the aluminum manganese alloy series, which has good rust prevention performance, good conductivity, and conductivity up to 41%. It has high plasticity in the annealed state, good plasticity in semi cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, and poor machinability.

Send Inquiry

Chat Now

Customer service is online. Enter the chat to get the latest quotation.

Spot stock
Customize
Factory direct sale
7 days delivery

Product Introduction

Product Specifications

Aluminium Alloy	Thickness (mm)	Width (mm)	Temper
1050,1060,1100	0.2-2.0	800-2000	O ，H14,H16,H24,H26
3003,3004,3105	0.2-2.0	800-2000	O，H14,H16,H24,H26
Standard Size	standard thickness:0.3-1.2mm
Surface	standard width:914mm/1000/1200/12120mm
	Size can be produced as per clients requirement
Surface	mill finish, flat, smooth, stucco emboss(orange peel), corrugation
Back lamination	polykraft paper, polysurlyn, kraft paper, craft paper
Polykraft thickness	about 0.1mm
Corrugation type	6x32mm( wave height 6mm ,and wave distance 32mm)
Quality Standard	ASTM B209,EN573-1
MOQ per size	1 tons
Payment Terms	TT OR LC OR DP at sight
Delivery time	Within 30 days after receipt the lc or deposit
Material Quality	Tension level, Flat, Free of defects like oil stain, Roll Marks, waves, dents, Scrath,etc A+++ quality
Application	heat insulation moisture barrier, oil field
Packaging	Standard export worthy wooden pallets, and standard packing is about 2 .5tons/pallet or 100 feet one roll
	Coil Id:508mm, eye to wall or eye to sky as per clients requirement
	or 100 feet one roll and each roll packed in one carton box, one 20' container can be loaded about 280 rolls

PRODUCT	ALLOYS	TEMPERS	THICKNESS(MM)	WIDTH(MM)	LENGTH(MM)
aluminum sheet	1050,1060,1070,1100,1145,1200,1235,3003,3004,3005,3105,5005,5052,5083,5182,5754,6061,8077,	all tempers	0.2--600	up to 2650	up to 8000
coil	1050,1060,1070,1100,1145,1200,1235,3003,3004,3005,3105,5005,5052,5083,5182,5754,6061,8011	all tempers	0.2--10	up to 2650	coil
heat-treatable products	6061	O, T4 ,T6 ,T651	0.8--600	up to 1550	up to 7500 or coil
5-bar tread plate and diamond tread gright	1050,1100,3003,3105,5052,5083,5754	all tempers	1.4--6.35	up to 1650	up to 7500 or coil
pp cap stock	8011	H16,H18,H24	0.14--0.3	up to 1450	coil
litho sheet stock	1060,1070	H18	0.15--0.3	up to 1450	coil
cable wrap foil	8011	O,H22	0.15--0.2	up to 1450	coil
fin foil	8011,1100	H22,H24	0.1--0.15	up to 1450	coil
aluminum composite pannel stock	1100,3003	H16,H18	0.08-0.8	up to 1600	coil
wall cladding stock	1100,3003,5005,5052	H14,H24	1.5--3.0	up to 2650	up to 8000
aluminum foil	1050,1060,1070,3003,5052,8011,	all tempers	over 3.0	up to 1420	coil
hot stock	1050,1060,1070,3003,5052,8011	F	over 3.0	up to 2700	coil
plate	1050,1200,3003,5005,5052,5754,5083,5806,6061,6082,6063	F,H112	3--600	3--600	up to 16000

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Al
1050	0.25	0.4	0.05	0.05	0.05	_	0.05	0.03	≥99.5
1060	0.25	0.35	0.05	0.03	0.03	_	0.05	0.03	≥99.6
1100	Si+Fe:0.95		0.05~0.40	0.05	_	_	0.1	_	≥99
1200	Si+Fe:1.00		0.05	0.05		_	0.1	0.05	≥99
3003	0.6	0.7	0.05~0.20	1.0~1.5	_	_	0.1	_	Remainder
3105	0.6	0.7	0.3	0.30~0.8	0.20~0.8	0.2	0.4	0.1	Remainder