6061 T5 Aluminum Tube
video

6061 T5 Aluminum Tube

A tube that leaks or will not seat at assembly is seldom a last-minute tolerance slip—it is a mismatch nobody confirmed against the drawing. For 6061 T5 Aluminum Tube, what matters to a buyer: Medium-to-high strength, with excellent weldability, corrosion resistance, and machinability—the most versatile structural alloy. It is typically supplied to ASTM B241 (seamless) / B221 (extruded); a material test certificate (MTC) is available on request.
Send Inquiry
Chat Now

Customer service is online. Enter the chat to get the latest quotation.

  • Spot stockSpot stock
  • CustomizeCustomize
  • Factory direct saleFactory direct sale
  • 7 days delivery7 days delivery
Product Introduction

6061 T5 Aluminum Tube Overview

Mg-Si (6000 series). Medium-to-high strength, with excellent weldability, corrosion resistance and machinability - the most versatile structural alloy.

Why choose 6061 T5 Aluminum Tube

Structural and general-purpose tubing.

Supplied to ASTM B241 (seamless) / B221 (extruded); T5 is a common, workable temper option.

Heat-treatable alloy - temper chosen to match the job.

Processing & customization

Cut-to-length, end facing, bending (where applicable), and surface options (anodizing / powder coating) per request.

 

7075 Aluminum Tube

 

6061 T5 Aluminum Tube Specifications

Parameter Value
Grade 6061
Temper T5
Shape Seamless or welded round tube / pipe (also square / rectangular on request)
Size range 2–1000 mm (custom sizes on request)
Tolerance Per ASTM B210 / B241 (OD & WT), or confirmed drawing.
Surface Mill finish (standard); anodized or powder-coated on request.
Standard ASTM B241 (seamless) / B221 (extruded)

 

Full available dimensions

Dimension Typical range Standard / note
Outer diameter (OD) 2–1000 mm (seamless 3–800 typical; welded 2–1000) ASTM B210 / B241
Wall thickness (WT) 0.5–50 mm (or per Schedule) ASTM B210 / B241
Inner diameter (ID) = OD − 2×WT (derived) -
Length fixed / multiple / coil per order
Nominal size (DN / NPS) & Schedule DN6–DN1200; SCH 5/10/40/80 … ASME B36.10M

Tolerance is per Per ASTM B210 / B241 (OD & WT), or confirmed drawing. Dimensions and tempers outside the listed range are available on request.

Send an Inquiry Now

Chemical Composition

Element Typical / limit (wt%)
Si 0.40–0.80
Fe ≤0.70
Cu 0.15–0.40
Mn ≤0.15
Mg 0.80–1.20
Cr 0.04–0.35
Zn ≤0.25
Ti ≤0.15
Al remainder

Values are typical / specification limits (AA / ASTM / EN). Final composition is per the material test certificate (MTC).

 

Mechanical & Physical Properties

Typical properties for T5 (AA / ASTM / EN, multi-source):

Property Typical value
Tensile strength (UTS) 240–260
Yield strength 215
Elongation ≥12
Hardness ≈80 HB
Shear strength 160
Fatigue strength -

Mechanical & physical values are typical for the listed tempers (AA / ASTM / EN, multi-source); per MTC / order.

 

Physical properties

Property Typical value
Density (g/cm³) 2.70
Thermal conductivity (W/m·K) 167
Electrical conductivity 43% IACS
CTE (×10⁻⁶/K) 23.6
Modulus of elasticity (GPa) 68.9
Melting range (°C) 582–652

 

Equivalent Grades

System Designation
UNS A96061
EN EN AW-6061
DIN 3.3211
GB 6061
JIS A6061

 

Temper & Heat Treatment

This alloy is heat-treatable. Current temper: T5.

Solution heat treatment + artificial aging (T6 typical: ~530±5°C solution, 175±5°C × 8h; T6511 adds 1–3% stretch for stress relief).

 

Typical Applications

Structural and general-purpose tubing

 

Building Architectural Structures

 

How to Choose 6061 vs Similar Grades

Data-supported comparison to help buyers pick the right alloy (typical values; confirm per MTC):

Grade Series Typical UTS (MPa) Density (g/cm³) Weldability Where it fits
6061 6 310 2.70 Excellent Structural and general-purpose tubing
6063 6 241 2.70 Excellent Architectural/decorative/heat-sink tubing
6082 6 310 2.70 Good Structural / fluid tubing (EN)
6005 6 260–310 2.70 Good Structural tubing

UTS shown is a representative temper value; full temper-by-temper data is per MTC / order.

 

Welding & Fabrication

ER4043 (general purpose) / ER5356 (high strength, anodizing color close to base). HAZ softens to ~T4; re-heat-treat to restore T6 properties.

 

Cutting, Machining & Surface Finish

Cut-to-length, end facing, bending (where applicable), and surface options (anodizing / powder coating) per request.

 

Quality Check Before Shipment

We pick only the key check items and write them as risk · action · standard · result, with explicit confirmation nodes and an exception path:

Risk the buyer carries: A tube that leaks or will not seat at assembly is seldom a last-minute tolerance slip - it is a mismatch nobody confirmed against the drawing.

What we do (specific action): Before shipment, re-measure OD, wall thickness and length against the confirmed drawing, check straightness, and perform visual and (where applicable) weld inspection.

How we judge it: Against the confirmed drawing / sample and the requirements of ASTM B241 (seamless) / B221 (extruded) - not by feel.

Confirmation nodes: Requirement / drawing confirmation → first-piece or key milestone confirmation → pre-shipment check.

How we handle exceptions: On any deviation we isolate and re-check first; if out of tolerance we rework or confirm with the customer - the part does not pass to the next step.

 

aluminum pipe inspection

 

Common buyer pain points & how we handle them

Risk What goes wrong What we do
OD / wall thickness out of tolerance Won't seat at joint; pressure loss or burst risk Multi-point OD & wall measurement before shipment
'Seamless' assumed but actually welded Leak or failure in pressure service MTC states 'seamless'; optional hydrostatic / eddy-current NDT
Alloy marking mismatch Wrong corrosion / strength performance Grade marking verified vs MTC

 

Packaging & Shipping

Delivery starts from confirmation, not from production. For 6061 T5 Aluminum Tube / Pipe, we sync progress at three stages: requirement / drawing confirmation, first-piece or key milestone confirmation, and pre-shipment check. MOQ: Flexible / small orders negotiable. Lead time runs from drawing / sample confirmation, about 15–30 days. In custom projects, material, process and version changes can all affect scheduling - when something changes, we confirm its impact scope first, then give the next-step plan and timeline. Incoterms (FOB / CIF / EXW, confirmed per order); shipment from Qingdao / Shanghai / Tianjin.

Packaging & Shipping

 

Certification

Material test certificate (MTC, e.g. EN 10204 3.1) available on request. Specific certifications (e.g. marine / pressure / third-party) are confirmed per order (To be confirmed until specified).

 

Why Choose GNEE

We reduce your risk rather than claim it away: dimensions and temper are verified against your confirmed drawing before shipment, deviations are isolated and resolved before they reach you, and trade terms stay predictable - MOQ Flexible / small orders negotiable, lead time about 15–30 days.

GNEE has supplied aluminum products since 2008 and currently exports to 100+ countries and regions. Selection, dimensions and testing are confirmed against your drawing before we commit to production.

 

FAQ

What tempers are available for 6061 Aluminum Tube / Pipe?

6061 is heat-treatable. Available tempers include T6, T5, T6511, T4, O; final selection confirmed per order.

Which standard applies to this form?

Supplied to ASTM B241 (seamless) / B221 (extruded). If you specify ASTM / EN / GB, state it in the inquiry and we confirm the applicable standard.

What about MOQ and lead time?

MOQ: Flexible / small orders negotiable; lead time about 15–30 days from drawing / sample confirmation.

Can you provide MTC and custom sizes?

Custom sizes and tempers per drawing / sample are supported, with material test certificate (MTC) available. Attach specs and quantity with your inquiry.

Do you handle machining / surface finishing?

Cut-to-length, end facing, bending (where applicable), and surface options (anodizing / powder coating) per request. Details confirmed per order.

 

Hot Tags: 6061 T5 Aluminum Tube, China 6061 T5 Aluminum Tube manufacturers

Send Inquiry

whatsapp

Phone

E-mail

Inquiry