1200 Aluminum Sheet
Customer service is online. Enter the chat to get the latest quotation.
Spot stock
Customize
Factory direct sale
7 days delivery
1200 Aluminum Sheet Introduction
1200 aluminum plate is the industrial pure aluminum, with high plasticity, corrosion resistance, electrical and thermal conductivity, but low strength, heat treatment can not be strengthened, machinability is not good.
1200 Aluminum Sheet Plate Chemical Composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Others | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1200 | ≤0.15 | ≤0.25 | ≤0.05 | 0.10 | - | - | ≤0.10 | ≤0.05 | - | ≤0.05 | 99.00 |
1200 Aluminum Sheet Plate Mechanical Properties
| Tensile strength σb | Elongation δ10 | Elongation δ5 | Note |
|---|---|---|---|
| 75～105MPa | ≥22% | ≥25% | Longitudinal mechanical properties of tubes at room temperature |
1200 Aluminum Sheet Features
The 1200 aluminum alloy plate is a typical hard aluminum alloy in the aluminum-copper-magnesium series. Its composition is relatively reasonable and its comprehensive performance is better. Many countries produce this alloy, which is the largest amount of duralumin. The characteristics of this alloy are high strength, certain heat resistance, and can be used as working parts below 150°C.
At temperatures above 125°C, the strength of 1200 aluminum alloy is higher than that of 7075 aluminum alloy. The forming properties are relatively good in the hot state, annealed and newly quenched state and the heat treatment strengthening effect is remarkable, but the heat treatment process requirements are strict. The corrosion resistance is poor, but it can be effectively protected by cladding with pure aluminum; it is easy to produce cracks during welding, but it can be welded or riveted by a special process. Widely used in aircraft structures, rivets, truck hubs, propeller components, and various other structural parts.
Hot Tags: 1200 aluminum sheet, China 1200 aluminum sheet manufacturers, 1 series Aluminum Plate, 1050 Aluminum Plate, 1060 Aluminum Plate, Aluminum Welding Rods, Industrial applications, Pure aluminum alloy
Previous
1070 Aluminum SheetYou Might Also Like
Send Inquiry