5059 Aluminum Sheet
Customer service is online. Enter the chat to get the latest quotation.
Spot stock
Customize
Factory direct sale
7 days delivery
| 5059 Aluminum Sheet |
5059 aluminum plate belongs to Al-Mg series anti-rust aluminum. The strength is higher than 3A21 aluminum plate. Especially it has higher fatigue strength, plasticity and corrosion resistance.
5059 Aluminum Sheet Chemical Composition
| Si | Cu | Mg | Zn | Mn | Ti | Zr | Cr | Fe |
| ≤0.45 | ≤0.25 | 5.0-6.0 | 0.4-0.9 | 0.6-1.2 | ≤0.20 | 0.050-0.250 | ≤0.25 | 0.50 |
5059 Aluminum Sheet Characteristics
5059 has a density of 2.67 kg/m3, Melting point is 590 °C ( =1.090 °F).
1. 5059 aluminum plate has high tensile strength. Good welding performance. Features such as strong resistance to sea water and marine climate corrosion. So, it is widely used in shipbuilding.
2. 5059 aluminum plate has good electrical conductivity and energy absorption performance. It is an ideal material for manufacturing various liquid, liquefied gas, and powder tankers.
Machinability Of 5059 Aluminum Sheet
| Tensile strength (MPa) | ≤225 |
| Elongation deltaδ(%) | ≥10 |
Sample size: bar diameter(square bar, hexagonal bar inscribed circle diameter) of 150 or less
Note: rod longitudinal mechanical properties at room temperature.
5059 Aluminum Plate Heat Treatment
Homogenizing annealing
Heating to 440 ℃. Holding time 12~14 h; Air cooling.
Rapid annealing:
Heating to 350~350 ℃.The heat preservation time of 30~120 min; Air or water cooling.
High-temperature annealing
Heating to 350~350 ℃, Thickness or<6 mm or6 mm, heat preservation time is 2~10 min or 10~ 30 min; Air cooling.
Low-temperature annealing
Heating to 250~300 ℃ and 150~180℃; Holding time is 1~2 h.Air cooling.

Hot Tags: 5059 aluminum sheet, China 5059 aluminum sheet manufacturers, 5 series Aluminum Plate, 5052 Aluminum Plate, 5083 aluminum alloy, 5083 Aluminum Plate, Fatigue strength
Previous
5052B Aluminum SheetYou Might Also Like
Send Inquiry














