5252 Aluminum Alloy Sheet
Customer service is online. Enter the chat to get the latest quotation.
Spot stock
Customize
Factory direct sale
7 days delivery
| 5252 Aluminum Alloy Sheet |
The aluminium / aluminum 5252 alloy is a wrought, non-heat treatable alloy. The 5252 alloy has medium strength but retains its excellent corrosion resistance. The following datasheet will provide more details about the aluminium / aluminum 5252 alloy.
Chemical Composition
The following table shows the chemical composition of the aluminium / aluminum 5252 alloy.
| Element | Content (%) |
|---|---|
| Aluminium / Aluminum, Al | 97.5 |
| Magnesium, Mg | 2.5 |
Physical Properties
The physical properties of the aluminium / aluminum 5252 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.6-2.8 g/cm3 | 0.0939-0.1011 lb/in3 |
Mechanical Properties
The mechanical properties of the aluminium / aluminum 5252 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Elastic modulus | 70-80 Gpa | 10152-11603 ksi |
| Poisson’s ratio | 0.33 | 0.33 |
Thermal Properties
The thermal properties of the aluminium / aluminum 5252 alloy are tabulated below.
| Properties | Conditions | ||
|---|---|---|---|
| T (ºC) | Treatment | ||
| Thermal conductivity | 138 W/mK | 25 | All |
Fabrication and Heat Treatment
Machinability
The machinability of the aluminium / aluminum 5252 alloy is poor when compared with other aluminium / aluminum alloys. If machining is performed, lubricating oil must be used. However, the finish tends to be ‘gummy’.
Forming
The aluminium / aluminum 5252 alloy can be hot and cold formed very easily.
Welding
The aluminium / aluminum 5252 alloy is weldable using commercial welding methods. The preferred methods are TIG and /or MIG. Brazing method is not suitable.
Forging
The aluminium / aluminum 5252 alloy is forgeable from 510 to 371°C (950 to 700°F).
Hot Working
The aluminium / aluminum 5252 alloy can be hot worked if required in the range of 482°C (900°F) down to 260°C (500°F).
Cold Working
The aluminium / aluminum 5252 alloy can be easily cold worked using the conventional methods. It is suited for cold forming by blanking, drawing, or bending.
Annealing
The aluminium / aluminum 5252 alloy can be annealed at 343°C (650°F) and then air cooled.
Hot Tags: 5252 aluminum alloy sheet, China 5252 aluminum alloy sheet manufacturers, 5 series Aluminum Plate, 5052 Aluminum Plate, 5083 aluminum alloy, 5083 Aluminum Plate, Fatigue strength
You Might Also Like
Send Inquiry