6061 Aluminum Bar
video

6061 Aluminum Bar

The main alloying element of 6061 aluminum bar is magnesium and silicon, and the formation of Mg2Si phase. It contains some amount of manganese and chromium, and sometimes small amounts of copper or zinc are added to improve the strength of the alloy.
Send Inquiry
Chat Now

Customer service is online. Enter the chat to get the latest quotation.

  • Spot stockSpot stock
  • CustomizeCustomize
  • Factory direct saleFactory direct sale
  • 7 days delivery7 days delivery
Product Introduction

The main alloying elements of the 6061 aluminum bar are magnesium and silicon and the formation of the Mg₂Si phase. It contains some amount of manganese and chromium, and sometimes small amounts of copper or zinc are added to improve the strength of the alloy. It is a popular aluminum alloy used in a wide variety of applications, including aerospace, automotive, construction, and marine industries. The alloy is a heat-treated alloy with good mechanical properties such as high strength, excellent corrosion resistance, and good weldability.

 

6061 aluminum bar is available in various forms, including round, square, rectangular, and hexagonal shapes. It can also be extruded, which means it can be formed into complex shapes and designs. Additionally, 6061 aluminum bar can be machined, drilled, and cut easily, making it a versatile material for many different applications.

 

Why 6061 Is the Most Requested Aluminum Bar Grade

 

6061 is a heat-treatable Al-Mg-Si-Cu alloy. It accounts for the majority of our aluminum bar inquiries because it hits a practical sweet spot: T6 temper reaches 310 MPa tensile strength, yet the material still machines cleanly, welds without cracking, and resists corrosion in outdoor and marine environments. You don't need to compromise between strength and workability the way you do with 7075 (stronger but poor weldability) or 3003 (excellent formability but not heat-treatable).

 

For buyers sourcing bar stock for CNC machining, the T651 temper is worth understanding. It goes through the same solution heat treatment and artificial aging as T6, but with an additional stretching step (1–3% permanent set) that relieves internal residual stress. If you've ever had a part warp after the second or third machining operation, switching from T6 to T651 usually fixes it. The mechanical properties are identical; the difference is dimensional stability.

 

 
 

Strength-to-Weight Ratio

T6 temper delivers 310 MPa UTS at 2.70 g/cm³ density-roughly one-third the weight of steel at comparable cross-sections. This is why 6061 shows up in everything from bicycle frames to drone motor mounts.

 
 
 

Machinability

According to the Aluminum Association's machinability rating standards, 6061 aluminum alloy is rated Class B (Good). When using carbide tools at cutting speeds of 150–300 m/min, it produces clean chips. During CNC turning, a surface roughness of Ra 0.8 µm or better can be achieved without the need for secondary polishing.

 
 
 

Weldability & Corrosion Resistance

6061 aluminum alloy exhibits excellent weldability and can be welded using GTAW (TIG) or GMAW (MIG) processes with 4043 or 5356 filler wire. Its general corrosion resistance is rated Class B (suitable for industrial and coastal atmospheric environments without additional protection).

 

 

Technical Specifications of 6061 aluminum Bar

 

Chemical Composition (per ASTM B211 / EN 573-3)

Element Symbol Min (%) Max (%) Role in Alloy
Silicon Si 0.40 0.80 Forms Mg₂Si precipitate-the primary strengthening phase
Iron Fe - 0.70 Impurity; controlled to limit hard intermetallic particles
Copper Cu 0.15 0.40 Improves strength; reduces corrosion resistance slightly
Manganese Mn - 0.15 Impurity controlled to low levels
Magnesium Mg 0.80 1.20 Combines with Si to form Mg₂Si; drives age hardening
Chromium Cr 0.04 0.35 Prevents grain growth during solution heat treatment
Zinc Zn - 0.25 Impurity
Titanium Ti - 0.15 Grain refiner
Others (each) - - 0.05 -
Others (total) - - 0.15 -
Aluminum Al Remainder (~97.5%) Base metal

 

Composition limits shown are per ASTM B211/B221 and EN 573-3. Each production heat is verified by Optical Emission Spectrometry (OES) and documented on the Mill Test Certificate.

 

Mechanical Properties by Temper

The table below lists typical values for extruded and cold-finished 6061 bar stock. These are representative figures based on Aluminum Association data. Actual minimums per ASTM B211/B221 may vary by cross-section and temper-refer to the MTC for certified values on your specific lot.

Temper Condition UTS (MPa) Yield 0.2% (MPa) Elongation (%) Brinell Hardness Shear (MPa) Fatigue* (MPa)
O Fully annealed 124 55 30 30 83 62
T4 / T451 Solution heat-treated, naturally aged 241 145 25 65 165 97
T6 / T651 Solution heat-treated, artificially aged 310 276 17 95 207 97

 

*Fatigue strength at 5 × 10⁸ cycles (R.R. Moore test). UTS = Ultimate Tensile Strength. Elongation in 4D.

Temper selection guide: Choose O for deep drawing or complex forming (lowest strength, highest ductility). Choose T4 for parts that need forming before final aging (moderate strength, good bendability). Choose T6 for structural and general machined parts (peak strength, most common). Choose T651 for precision-machined parts with tight tolerances (same strength as T6, stress-relieved by stretching to reduce warping).

 

Physical Properties of of 6061 aluminum Bar

Property Value Notes
Density 2.70 g/cm³ (0.098 lb/in³) ~1/3 of steel
Melting range 582–652°C (1,080–1,206°F) Solidus to liquidus
Elastic modulus 68.9 GPa (10,000 ksi) Tension
Poisson's ratio 0.33 -
Thermal conductivity (T6) ~167 W/m·K Lower in T4 (~154), higher in O (~180)
Electrical conductivity (T6) 43% IACS Not a conductor grade; use 1350 for electrical
CTE (20–100°C) 23.6 µm/m·K Important for thermal fit applications
Specific heat 896 J/kg·K -

 

Equivalent Designations

Standard System Designation
Aluminum Association (AA) 6061
UNS A96061
EN (European) EN AW-6061 / AlMg1SiCu
DIN (German) 3.3211
JIS (Japanese) A6061
ISO AlMg1SiCu
GB (Chinese) 6061 (formerly LD30)

 

 

Applicable Standards

 

Product Type Standard Coverage
Cold-finished bar, rod, wire ASTM B211 Dimensional tolerances, mechanical property minimums
Extruded bar, rod, profile ASTM B221 Extruded products, temper requirements
European extruded profiles EN 755-2 / EN 755-3 Dimensions, tolerances for round/square/hex
Chinese extruded bar GB/T 3191 Chemical composition, mechanical, inspection rules
Aerospace material specs AMS 4115, 4116, 4117, 4128 Bar and rod for aerospace applications

 

Send an Inquiry Now

Available Shapes and Size Ranges

 

We supply 6061 bar stock in four cross-section profiles. Each shape serves different engineering needs-round bar for turned shafts and pins, square bar for structural frames and guide rails, flat bar for brackets and spacers, and hex bar for fasteners and tooling. All shapes are available in the same tempers and surface finishes.

6061 Aluminum Round Bar

6061 aluminum Round Bar - Diameter 3–400 mm

 

Production method: Cold-drawn (3–100 mm, tolerance h8–h9) or extruded (6–400 mm, standard tolerance per ASTM B221).

Typical uses: CNC-machined shafts, dowel pins, valve stems, bushings, couplings, motor mounts, and robotic arm joints.

Standard lengths: 2,500 / 3,000 / 6,000 mm. Cut-to-size available.

Tolerance (cold-drawn): dia ≤ 80 mm: h9 (0/-0.074 mm at 80 mm); dia ≤ 18 mm: h8 (0/-0.027 mm).

6061 aluminum Square Bar - Side 5–200 mm

 

Production method: Extruded (standard) or cold-drawn (precision, side ≤ 50 mm).

Typical uses: Structural frames, guide rails, machinery bases, fixtures, architectural trim, and fence posts.

Standard lengths: 3,000 / 6,000 mm.

Advantage over round: Flat faces allow direct bolting and welding without machining a flat. Easier to clamp in milling fixtures.

6061 Aluminum Square Bar

 

6061 Aluminum Flat Bar

6061 aluminum Flat Bar - Thickness 3–50 mm × Width 10–300 mm

 

Production method: Extruded or cut from plate for wider sections.

Typical use: Brackets, spacers, tie bars, supports, stair treads, heat sinks, electrical bus bars (when conductivity is non-critical).

Standard lengths: 1,000–6,000 mm.

Advantage: Rectangular cross-section provides high section modulus in one direction. More material-efficient than square bar for bending loads in a known plane.
 

6061 aluminum Hex Bar - Across Flats 5–100 mm

 

Production method: Extruded or cold-drawn (AF ≤ 50 mm).

Typical use: Bolts, nuts, plugs, fittings, tooling components, valve handles.

Standard lengths: 3,000 / 6,000 mm.

Advantage: Six flat faces allow wrench grip. The standard shape for threaded fasteners and mechanical couplings.

6061 Aluminum Hex Bar

6061 aluminum Bar Shape Selection: When to Use What

 

If your part needs... Recommended shape Why
Rotational symmetry (shaft, pin, bushing) Aluminum Round bar Minimal material removal on lathe; concentricity is inherent to the cross-section
Flat mounting surface on all sides Aluminum Square bar No need to mill flats; both axes have equal section modulus
High bending stiffness in one direction Aluminum Flat bar Rectangular section places material where it resists bending, lighter than equivalent square
Wrench or tool engagement Aluminum Hex bar Six driving faces at 60° intervals; standard for fasteners and fittings
Precision turning with tight tolerance Aluminum Round bar, Aluminum cold-drawn, 6061 T651 h8 tolerance + stress relief = minimal warping during multi-op machining
Welded structural assembly Aluminum Square or Aluminum flat bar, 6061 T6 Flat faces for fillet welds; T6 retains strength after welding (HAZ drops to the ~T4 level).

 

Contact Our Engineers Today

 

Standard Size List (Common Round Bar Diameters)

 

Diameter (mm) Weight (kg/m) Diameter (mm) Weight (kg/m) Diameter (mm) Weight (kg/m)
6 0.076 20 0.848 50 5.30
8 0.136 25 1.33 60 7.63
10 0.212 30 1.91 80 13.6
12 0.305 35 2.60 100 21.2
15 0.477 40 3.39 150 47.7
18 0.687 45 4.29 200 84.8

 

6061 aluminum Bar Temper Comparison: Choosing the Right Condition

 

One of the most common questions we get from buyers is, "Should I order T6 or T651?" The short answer is that the mechanical properties are identical (310 MPa UTS, 276 MPa yield). The difference is whether the bar has been stress-relieved by stretching. If you're doing heavy CNC machining on the bar-especially multiple operations that remove material asymmetrically-T651 will save you from parts that warp after the second or third cut.

 

Temper Process UTS (MPa) Yield (MPa) Elong. (%) Best For
6061 T4 Aluminum Bar Solution heat-treated, naturally aged at room temperature ~241 ~145 ~25 Parts that need some forming after heat treatment. Moderate strength, good ductility. Will continue to age-harden slowly over months.
6061 T6 Aluminum Bar Solution heat-treated + artificially aged (peak strength) ~310 ~276 ~17 The default choice for structural and machined parts. Maximum strength. Most stocked temper.
6061 T651 Aluminum Bar Same as T6 + stress-relieved by stretching (1–3% permanent set) ~310 ~276 ~17 Precision CNC machining. The stretching step relieves internal stress so parts don't warp when you machine away material from one side.
6061 T6511 Aluminum Bar Same as T651 but for extruded profiles (stress-relieved by stretching after extrusion) ~310 ~276 ~17 Extruded bar and profile stock. Standard for precision extruded shapes.

 

Surface Treatment Options

 

Finish Description Typical Application
Mill finish Natural as-extruded or as-drawn surface. May show faint die lines or drawing marks. No coating applied. Structural parts, internal components, parts that will be machined or painted by the buyer
Bright drawn Cold-drawn through a polished die. Smooth, reflective surface with Ra ≤ 0.4 µm. Decorative trim, visible shafts, precision pins where machining the OD is not desired
Anodized (Type II) Sulfuric acid anodizing. Oxide layer 10–25 µm. Available in clear, black, bronze, gold, red, and blue. Architectural trim, consumer electronics housings, marine hardware, any part needing corrosion protection + color
Hard anodized (Type III) Hard coat anodizing. Oxide layer 25–75 µm. Surface hardness ~60 HRC equivalent. Wear surfaces, pneumatic cylinders, valve bodies, military equipment
Powder-coated Electrostatic spray, thermoset powder. Cured at 180–200°C. Full RAL color range. Outdoor equipment, machine frames, architectural fencing, any part needing UV and weather resistance
Polished Mechanical polishing. #4 satin (brushed), #6 semi-bright, or #7 mirror finish. Decorative hardware, food equipment, medical device handles
Sandblasted Grit blasting to a uniform matte surface. Removes die lines and oxidation. Industrial components: pre-treatment before anodizing or coating

 

 

1

 

Scope Of Application:

6061 aluminum bar is a type of extruded aluminum alloy that is widely used in various applications due to its excellent properties such as high strength, good corrosion resistance, and good workability.

Aerospace & Defense

Aerospace & Defense

Secondary structural components, brackets, fittings, actuator housings, drone frames. 6061 T651 temper for machined parts with tight tolerances. Ultrasonic-tested stock per ASTM B594 for flight-critical applications.

Automotive battery trays

Automotive & Transportation

Chassis components, suspension links, drive shafts, brake caliper brackets, EV battery enclosure frames, and heat exchanger fittings. 6061 T6 is the standard temper for structural parts.

Industrial gas systems

Industrial Machinery

Pneumatic cylinder bodies, valve stems, guide rails, linear motion shafts, machinery bases, and jig and fixture components. Cold-drawn 6061 T651 for precision shafts; extruded 6061 T6 aluminum for structural frames.

Offshore Platform Structures

Marine & Offshore

Boat railings, mast fittings, deck hardware, and winch components. 6061's general corrosion resistance rating (B) is adequate for seawater splash zones. Anodizing or powder coating is recommended for submerged or long-term exposure.

Electronics & Telecommunications

Electronics & Telecommunications

Heat sinks, enclosures, RF shielding frames, antenna mounts, and server rack rails. Thermal conductivity of 167 W/m·K in 6061 T6 is sufficient for many thermal management applications. Anodized finish provides electrical isolation.

Consumer Goods & Sporting Equipment

Consumer Goods & Sporting Equipment

Bicycle frames and components, camera tripod parts, flashlight bodies, cooking pot handles (food-grade compliance available), furniture hardware. 6061 T6 for strength; anodized finish for appearance.

product-368-253

Medical Equipment

Wheelchair frames, surgical instrument handles, imaging equipment brackets, and prosthetic components. 6061 T651 temper for machined precision parts; anodized or passivated surface for biocompatibility.

Architectural Decoration

Construction & Architecture

Curtain wall mullions, window and door frames, handrail systems, scaffolding connectors, and architectural trim. 6061 aluminum Square bar and flat bar profiles are most common in this sector. Powder-coated or anodized finish.

 

Quality Control and Inspection

 

Every production lot goes through a defined inspection sequence before shipment. The tests below are standard for all orders. Additional testing (ultrasonic, dye penetrant, and full mechanical on each piece) is available for aerospace and critical-application orders-just specify the requirement on your PO.

 

Inspection Item Method / Standard What It Verifies Sample Size
Chemical composition OES (Optical Emission Spectrometry) per ASTM E1251 / GB/T 7999 Si, Fe, Cu, Mn, Mg, Cr, Zn, Ti within ASTM B211 limits 1 sample per heat (typically 1 heat = 5–15 tons)
Tensile test ASTM B557 / GB/T 228.1 (standard tensile specimen, 50 mm gauge) UTS, yield strength (0.2% offset), elongation 2 specimens per lot (per ASTM B211 lot definition)
Hardness test Brinell (500 kgf, 10 mm ball) per ASTM E10 Brinell hardness number (BHN). T6 target: 90–95 HB 3 points per lot, minimum
Dimensional inspection Micrometer / caliper / height gauge Diameter or cross-section within tolerance, length ±5 mm, and straightness ≤ 1 mm/300 mm 100% of cold-drawn bars; 10% sample of extruded bars
Surface visual inspection Visual per ASTM B221 surface quality requirements No cracks, laps, segregate marks, deep die lines, or corrosion pitting 100%
Ultrasonic testing (optional) ASTM B594 (pulse-echo, immersion method) Internal discontinuities: inclusions, porosity, cracks parallel to surface On request - typically 100% for aerospace orders
Conductivity test (optional) Eddy current conductivity meter (% (IACS) Verifies temper condition (T6: 40–47% IACS; O: 47–55% IACS) On request
Macrostructure (optional) GB/T 3246.2 / ASTM E340 No cracks, shrinkage, or porosity in cross-section. Layer depth ≤ half the diameter tolerance On request - required for GB/T 3191 compliance

 

OES machine
Chemical composition
GNEE aluminum rod Dimensional inspection
Dimensional inspection
Surface visual inspection
Surface visual inspection
aluminum rod Ultrasonic Testing UT
Ultrasonic testing (optional)

 

Send us your specifications - alloy, temper, shape, dimensions, quantity, and destination port. You'll receive a detailed quotation with price, lead time, and packaging plan within 24 hours.

Request Latest Price

 

Mill Test Certificate (MTC)
Each shipment includes an EN 10204 Type 3.1 certificate.

 

Quality system: Our production facility operates under ISO 9001:2015. The quality management system covers raw material verification, in-process control points, final inspection, traceability (heat number tracking from billet to shipped bar), and non-conformance handling. Certificate available on request.

6061 T6 aluminum rod MTC
6061 T6 aluminum rod MTC
6061 T6511 aluminum rod MTC
6061 T6511 aluminum rod MTC
6061 T6 aluminum rod MTC
6061 T6 aluminum Round rod MTC

 

Packaging and Export Shipping

 

Step Description Purpose
1. Surface protection Anti-rust oil applied to bare bar surface (SH/T 0692 compliant) Prevents oxidation and white rust during 30–45 days of sea freight
2. Inner wrapping Plastic film wrap + kraft paper layer Moisture barrier: kraft paper absorbs condensation
3. Bundle formation Bars bundled in groups of 10–50 pieces (depending on diameter), secured with steel strapping at 500 mm intervals Prevents individual bar movement and surface rubbing
4. Pallet loading Bundles placed on ISPM 15-fumigated wooden pallets (or steel cradles for heavy loads) ISPM 15 compliance required for import customs clearance in most countries
5. Outer protection Cardboard edge protectors at strapping points; desiccant bags (1 kg per pallet) inside the wrap Prevents strapping damage to bar surface; controls humidity inside package
6. Labeling Each bundle labeled with: heat number, alloy, temper, dimensions, quantity, net weight, gross weight, PO number Traceability and customs documentation
7. Container loading Pallets loaded into 20' or 40' container, secured with dunnage bags and lashing straps Prevents cargo shift during vessel pitching

 

6061 T6 aluminum rod Packaging
6061 T6511 aluminum rod Packaging
6061 T6511 aluminum rod for sale
6061 T6 aluminum rod for sale

Cooperative Customers:

 

Cooperative CustomersClient Visit 2

 

GNEE's Customer Cases

 

GNEE successfully produced and exported a batch of 6061-T6 aluminum round bars to Thailand. This shipment was specifically manufactured to meet marine and heavy industrial application standards. The entire batch is fully certified by BV (Bureau Veritas), conforming strictly to marine-grade requirements.

 

GNEE Exports BV 6061-T6 Aluminum Round Bars To Thailand

 

FAQ

 

Q: What is the difference between 6061-T6 and 6061-T651?

A: Both tempers have the same nominal mechanical properties (UTS 310 MPa, yield 276 MPa). The difference is in stress relief. T651 bars are stretched 1–3% after solution heat treatment to relieve internal residual stress. This reduces warping during CNC machining, making T651 the preferred choice for precision-machined components with tight tolerances. T6 is standard for general structural applications where dimensional stability after machining is less critical.

Q: What diameter range is available for a 6061 aluminum round bar?

A: Cold-drawn round bars are available from 3 mm to 100 mm in diameter with h8–h9 tolerance. Extruded round bars cover 6 mm to 400 mm diameter with standard tolerance per ASTM B221. Standard lengths are 2,500 mm, 3,000 mm, and 6,000 mm, with cut-to-size available for any length from 100 mm up.

Q: Can 6061 aluminum bar be welded?

A: Yes. 6061 has excellent weldability using GTAW (TIG) and GMAW (MIG) processes with 4043 or 5356 filler wire. Note that the heat-affected zone will lose strength in the T6 condition, dropping to approximately T4 levels (about 145 MPa yield). For applications requiring full T6 strength after welding, post-weld solution heat treatment and artificial aging are necessary. Resistance (spot) welding is also rated A (excellent).

Q: What surface finishes are available for 6061 aluminum rod?

A: Standard finishes include mill finish (as-extruded or as-drawn), bright drawn finish, anodized (Type II sulfuric or Type III hard coat in clear, black, bronze, or gold), powder coated (RAL colors), polished (#4 satin or mirror), and sandblasted matte. Mill finish is the most economical; anodizing is recommended for corrosion-critical or decorative applications.

Q: How is 6061 aluminum bar packaged for export shipping?

A: Bars are bundled with anti-rust oil coating, wrapped in plastic film and kraft paper, and then secured on ISPM 15-fumigated wooden pallets with steel strapping. Each bundle is labeled with heat number, alloy, temper, dimensions, quantity, and gross/net weight. Custom packaging, including wooden cases for precision bars or VCI film for tropical-climate destinations, is available on request.

Q: What certifications and test reports are provided with each shipment?

A: Each shipment includes a Mill Test Certificate (EN 10204 Type 3.1) documenting chemical composition (OES analysis), mechanical properties (tensile test per ASTM B557), hardness, and dimensional inspection results. Ultrasonic test reports per ASTM B594 are available for aerospace and critical-application orders. The ISO 9001:2015 quality system certificate is provided annually. Third-party inspection (SGS, BV, or TUV) can be arranged at the buyer's expense.

Q: What is the difference between extruded and cold-drawn 6061 bar?

A: Extruded bar is produced by pushing a heated billet through a die at ~500°C. It covers the full size range (6–400 mm) with standard tolerances per ASTM B221. Cold-drawn bar starts as extruded stock and is pulled through a carbide die at room temperature. This tightens the diameter tolerance to h8/h9, improves surface finish to Ra ≤ 0.4 µm, and slightly increases surface hardness. Cold-drawn bar is preferred for precision machining; extruded bar is more economical for structural applications.

Q: Can you supply 6061 aluminum bars cut to specific lengths?

A: Yes. We offer cut-to-size service with a length tolerance of ±2 mm for standard cutting (abrasive saw) and ±0.5 mm for precision cutting (band saw with coolant). Deburring of cut ends is included.

Q: Does a 6061 bar need corrosion protection for outdoor use?

A: 6061 has a general corrosion resistance rating of B, which means it can be used in industrial and seacoast atmospheres without protection. However, for long-term outdoor exposure or aesthetic applications, anodizing (Type II) or powder coating is recommended. In direct contact with dissimilar metals (steel, copper), galvanic corrosion can occur-use insulating gaskets or apply a coating to break the electrical contact.

Hot Tags: 6061 aluminum bar, China 6061 aluminum bar manufacturers, aluminium screed bar, 6061 Aluminum Bar, Solid Aluminum Rod, 6 Series Aluminum Bar, 5mm aluminum rod

Send Inquiry

whatsapp

Phone

E-mail

Inquiry