Aluminium L Angle
Customer service is online. Enter the chat to get the latest quotation.
Spot stock
Customize
Factory direct sale
7 days delivery
Aluminum L-angle is an L-shaped metal profile made of aluminum material with equal or unequal lengths on both legs, commonly used as a support structure, decorative strip, and other structural elements in construction, manufacturing, and other industrial applications. Compared with other metal materials, aluminum L-corners have the advantages of lightweight, corrosion resistance, ease of processing, and high cost-effectiveness, making them widely used in fields such as construction, mechanical equipment, and electronic devices. According to specific application requirements, aluminum L-corners can be produced in different sizes, thicknesses, and surface treatments to meet different needs.

Product Parameter:
|
Parameter |
Value |
|
Material |
Aluminum alloy |
|
Leg Length |
Variable, commonly 1 to 4 inches |
|
Thickness |
Variable, commonly 1/8 to 1/4 inch |
|
Length |
Customizable, commonly 12 feet |
|
Weight per Foot |
Varies based on profile size and thickness |
|
Finish |
Mill finish, anodized, or painted |
|
Tensile Strength |
Varies based on aluminum alloy and temper |
|
Yield Strength |
Varies based on aluminum alloy and temper |
|
Corrosion Resistance |
Good to excellent |
|
Machinability |
Fair to excellent |
|
Weldability |
Good to excellent |
Aluminum Angle Standards, Tempers, and Equivalent Grades
Extruded aluminum angles are produced and inspected to the following standards:
| Standard | Scope |
|---|---|
| ASTM B221 | Aluminum and aluminum-alloy extruded bars, rods, wire, profiles, and tubes - the primary spec for angle sections. |
| ASTM B308 / B308M | Standard structural profiles in 6061-T6 (I-beams, channels, angles, tees) - applies when the angle is ordered as a structural shape. |
| EN 755 | European spec for extruded rod, bar, tube, and profiles - the EN equivalent to ASTM B221. |
| GB/T 6892 | Chinese national standard for extruded profiles; mechanical values mirror ASTM B221 for the same 4-digit alloy. |
| ANSI H35.2(M) | Dimensional tolerances for aluminum mill products - the reference for leg, length, straightness, and cut-squareness limits. |
| EN 10204 3.1 | Mill test certificate documenting alloy, temper, dimensions, and test results; 3.2 and third-party inspection on request. |
Aluminum Angle Alloy Grades
The grade sets strength, corrosion resistance, formability, and finish response. Below are the wrought grades we supply as angles, with the typical temper and room-temperature strength for design screening.
6061 T6 aluminum angle
The heat-treatable structural all-rounder. In T6 it gives about 310 MPa UTS and 276 MPa yield, welds cleanly with ER4043 or ER5356, and anodizes to a slightly grayer silver than 6063. Default choice for welded frames, machine bases, brackets, and trailers.
6063 T6 aluminum angle
The architectural grade. Lower strength than 6061 (T5 ≈ 145 MPa yield; T6 ≈ 214 MPa yield) but the brightest, most consistent anodized finish - the reason it dominates window/door frames, trims, and decorative structures. Usually specified in T5.
6082 aluminum angle
The European structural favourite (EN AW-6082). T6 reaches about 310 MPa UTS and 270 MPa yield with good corrosion resistance, a common upgrade where a marine-leaning or higher-duty structure calls for more than 6063.
5052 aluminum angle
A 5xxx (Al–Mg) grade with excellent corrosion resistance and good formability, but it is normally supplied as a cold-formed angle from strip rather than extruded, and is not heat-treatable. Chosen where forming and corrosion matter more than high strength (H34 ≈ 215 MPa yield).
3003 aluminum angle
A non-heat-treatable 3xxx (Al–Mn) grade with good formability and moderate strength (O ≈ 55 MPa yield; H14 ≈ 150 MPa yield). Used for light-duty trim, fabricated brackets, and decorative work where weld strength is not critical.
5083 aluminum angle
A high-magnesium marine grade with strong corrosion resistance in seawater-exposed service (O/H111 ≈ 125–200 MPa yield). Typically supplied as plate or extruded section for marine and cryogenic structures; for continuous seawater immersion it outperforms 6061.
| Grade | Typical temper | UTS MPa | Yield MPa | Density g/cm³ | Angle use |
|---|---|---|---|---|---|
| 6061 | T6 | 310 | 276 | 2.70 | Structural all-rounder, welded frames |
| 6063 | T5 / T6 | 186 / 241 | 145 / 214 | 2.70 | Architectural trim, bright anodize |
| 6082 | T6 | 310 | 270 | 2.70 | Structural, marine-leaning |
| 5052 | H34 | 210–260 | 160–215 | 2.68 | Forming & corrosion (formed, not extruded) |
| 3003 | O / H14 | 145 / 185 | 55 / 150 | 2.73 | Light trim, fabricated brackets |
| 5083 | O / H111 | 275–350 | 125–200 | 2.66 | Marine, seawater-exposed structures |

Equal-Leg vs Unequal-Leg Aluminum Angle
| Factor | Equal-leg aluminum angle | Unequal-leg aluminum angle |
|---|---|---|
| Geometry | Both legs same length | Legs of different length |
| Typical use | Symmetric framing, edge trim, box sections, general bracing | Stiffeners, mounting brackets, one-sided reinforcement, transitional joints |
| Load path | Balanced in two directions | Extra material on the longer leg carries asymmetric load |
| Orientation | Symmetric - no handedness | Has a defined long/short leg; cut orientation must match the drawing |
Pick equal leg when the section is symmetric or the load is balanced. Choose unequal leg when one face carries more load or needs to meet a surface at a different offset. Because unequal-leg sections are handed, we verify the long/short-leg orientation against your cut drawing before cutting - a wrong-orientation cut is the most common fit-up failure on these sections.
Surface Finishes for Aluminum Angle
| Finish | Process | When to specify |
|---|---|---|
| Mill finish | As-extruded, no surface treatment | Economic; internal or non-visible frames, structural members |
| Anodized Type II (clear / colored) | Sulfuric acid, 5–25 µm oxide | Architectural trim, display, protected decorative surfaces |
| Anodized Type III (hardcoat) | Sulfuric, dense oxide up to 50 µm | Wear and abrasion service, guides, brackets |
| Powder coated | Electrostatic RAL color, baked | Color-matched handrail, signage, outdoor color |
| PVDF / fluoropolymer | Coil or spray coating | Exterior with long-term weather/UV demand |
| Brushed / polished | Mechanical surface treatment | Decorative visible surfaces |
6063 anodizes to a brighter, more consistent tone than 6061; if a project mixes the two in a visible run, tell us so we can keep the lot to one alloy or match the tone.

Please note that these values may vary depending on specific customer needs and product specifications. It is always important to contact us for detailed information.
Product Usage:
Equipment frames & machine guards: structural L-sections for bases, enclosures, and protective guarding where 6061-T6 carries load at one-third steel's weight.
Brackets & supports: L-stiffeners for panels, racks, shelving, and cabinetry.
Architectural trim & handrail: 6063 anodized or powder-coated angles for window/door frames, edge trim, and light railings.
Solar racking & mounting: corrosion-resistant, anodized structures for long outdoor service.
Trailer & transport structures: splash-zone frames, vehicle racks, and load bars.
Marine (non-immersed): splash-zone and deck fittings, boat trim; for continuous seawater immersion prefer 5083 or a coated system.
Furniture & display: light, rigid frames for fixtures, trade-show truss, and signage.
Conveyor & automation frames: dimensionally stable, easy to cut and bolt.
Tolerances of Aluminum Angle (Per ANSI H35.2(M))
Angles are extruded shapes, so leg length, thickness, length, straightness, and cut-squareness follow ANSI H35.2(M) §10. The representative leg-length limits below are the "other alloy" group (6061, 6082, 5083, etc.); 6063 - the architectural grade - is held to a tighter class. Confirm the exact bilateral limits against your size before order.
| Dimension | Range | Tolerance (other-alloy group) per ANSI H35.2(M) §10 |
|---|---|---|
| Leg length (each leg) | ≤ 25 mm | ±0.23 mm |
| Leg length (each leg) | 25–50 mm | ±0.30 mm |
| Leg length (each leg) | 50–100 mm | ±0.61 mm |
| Leg length (each leg) | 100–150 mm | ±0.86 mm |
| Length (cut) | ≤ 5000 mm | +4 / +7 mm |
| Length (cut) | 5000–10000 mm | +7 / +9 mm |
| Straightness | - | 1 mm per metre (non-O temper) |
| Cut-end squareness | - | 1° |
Thickness tolerance is confirmed against the cut drawing; corner radius follows the die spec. Where you specify single-side limits (e.g. +1.5 / −0), we hold to your drawing and quote the equivalent ANSI H35.2(M) bilateral value as reference.
Inspection and Measurement of Aluminum Angle
What we check: A 6061 angle that arrives as 6063 loses roughly 60 MPa of yield and anodizes to a different tone; a T5 delivered as T6 is soft; an unequal-leg angle cut from the wrong orientation sits proud of the assembly. We close those risks per lot before shipment.
How:
Alloy verification: 100% XRF / PMI per lot (ASTM E572 / E1251) to confirm the 4-digit alloy and the Mg/Si/Cu balance that distinguishes 6061 from 6063.
Temper check: hardness plus tensile verification (ASTM E10, ASTM B557) against the specified temper.
Dimensions: leg length, thickness, and corner radius measured against ANSI H35.2(M); straightness and cut-squareness checked per length; unequal-leg orientation verified against the cut drawing.
Surface: visual check for extrusion defects and finish consistency.
Document: a written EN 10204 3.1 mill test certificate travels with the order, recording alloy, temper, dimensions, and test results.


Packaging of Aluminum Angle for Export
Bundling: angles are strapped into uniform bundles with interleaving to protect corners and surfaces.
End protection: end caps or edge boards prevent transit damage to cut ends.
Wrap: PE shrink film or woven wrap, with moisture-barrier paper for long ocean transit.
Crating: seaworthy plywood crates or reinforced bundles for small or high-value lots; container loading planned for stable, non-shifting stacks.
Custom: packaging can be adapted to your handling and destination requirements.




Team Style:
GNEE has supplied aluminum products since 2008 and exports to more than 100 countries, supplying from our own production schedule rather than brokering stock. For aluminum angle we keep common 6061, 6063, and 6082 tempers available, issue EN 10204 3.1 mill test certificates, and run in-house grade and dimensional checks before shipment. Minimum order quantity is flexible - trial and volume orders are quoted on the same terms - with a standard 15–30 day production window for standard specifications. Our technical team selects alloy, temper, and finish against your actual service condition rather than quoting from a fixed list, and applies export-control screening to every order.
Need a size, temper, or finish not listed above? Send your drawing or spec and we will confirm die route, tolerance, and lead time.

FAQ
1. What is the difference between equal and unequal leg aluminum angle?
Equal-leg angles have two legs of the same length (e.g. 50 × 50 mm) for symmetric framing and trim. Unequal-leg angles have different leg lengths (e.g. 75 × 50 mm) for asymmetric loads and one-sided reinforcement. Unequal sections are handed, so the long/short-leg orientation must match your drawing.
2. Which alloy and temper should I choose?
For structural, welded, or load-bearing work use 6061-T6 (or 6082-T6 for a marine-leaning upgrade). For architectural trim and the brightest anodized finish use 6063-T5/T6. For forming and corrosion service with lower strength, 5052 or 3003. We confirm the choice against your load, environment, and fabrication method before you buy.
3. What sizes and thicknesses can you supply?
Standard equal legs run 20–100 mm and unequal legs such as 30×20 mm up to 150×100 mm, thickness 2–12 mm, length 3 m / 6 m or cut to length. Larger or non-standard sections are produced to drawing - send your requirement and we confirm die route and tolerance.
4. Can aluminum angle be welded, and which filler wire?
Yes. 6061 and 6082 weld by GTAW/GMAW using ER4043 (fluid, general-purpose) or ER5356 / ER5183 (stronger joint, better color match after anodizing). Strip any anodize from the joint first. Expect the weld zone to relax toward roughly T4 strength and to anodize differently - plan masked welding or post-weld touch-up for visible frames.
5. What surface finishes are available, and which for outdoor or marine use?
Mill finish, anodized Type II/III, powder coat (RAL), PVDF, and brushed/polished. For outdoor structural use, anodizing or powder coat is standard; for long-term exterior weather demand, PVDF. For marine, prefer 5083 or a coated 6061/6082 system - bare 6061 is good in splash zones but less resistant than 5xxx marine grades under continuous immersion.
6. What tolerances apply to leg length and thickness?
Per ANSI H35.2(M) §10 for extruded shapes: leg length ±0.23 mm up to 25 mm, ±0.30 mm for 25–50 mm, ±0.61 mm for 50–100 mm, ±0.86 mm for 100–150 mm (other-alloy group; 6063 tighter). Length +4/+7 mm to 5000 mm; straightness 1 mm/m; cut-squareness 1°. Thickness tolerance is confirmed against your drawing.
7. What documentation comes with the order?
Every lot ships with an EN 10204 3.1 mill test certificate covering alloy, temper, dimensions, and test results. EN 10204 3.2 and third-party inspection can be arranged on request.
8. What is the minimum order quantity and lead time?
MOQ is flexible - trial quantities and container loads are quoted on the same terms, so quote the quantity you actually need. Standard specifications run 15–30 days from order confirmation; we confirm the date against the current production schedule before you commit.
9. How is the angle packaged for export?
Sections are strapped into bundles with interleaving and end protection, wrapped in PE/shrink film with moisture-barrier paper, and loaded in seaworthy crates or reinforced bundles for stable ocean transit. Packaging can be adapted to your destination and handling needs.
10. How do you verify grade and dimensions before shipment?
Per lot we run XRF/PMI alloy verification, hardness plus tensile temper check, and dimensional inspection (leg, thickness, corner radius, straightness, cut-squareness) against ANSI H35.2(M) and ASTM B221, with unequal-leg orientation checked against the drawing. Any lot that fails is quarantined and replaced from a verified batch - suspect material is never mixed into your order.
11. Can you cut to length and supply custom unequal-leg orientations?
Yes. Cut-to-length is standard, and unequal-leg sections are cut to the long/short-leg orientation shown on your drawing, which we verify as a sign-off item. Non-standard legs and thicknesses are produced to drawing.
Hot Tags: aluminium l angle, China aluminium l angle manufacturers, aluminium extruded sections, Aluminium L Angle, extruded aluminium sections, Aluminum Angle Extrusions
Previous
No InformationYou Might Also Like
Send Inquiry















