5052 H32 Anti-slip Aluminum Tread Plate
Customer service is online. Enter the chat to get the latest quotation.
Spot stock
Customize
Factory direct sale
7 days delivery
The 5 bars aluminum tread checkered plate is one of the more common pattern aluminum plates. It has good anti-skid effect and is widely recognized by users.
The 5052 aluminum tread checkered plate has good anti-skid effect, good corrosion resistance and anti-rust performance, and is often used in some special places, such as cold storage floor and ship floor, which are prone to rust.
Advantages of 5052 H32 aluminum patterned plate in cold storage environment

Low temperature adaptability
After testing, the impact toughness retention rate of 5052 aluminum checkered plate at -40℃ is >85%, and the elongation is still 8-10%, which is much better than ordinary steel.

Anti-slip safety
The anti-slip grade of 5052 H32 anti-slip aluminum plate is R10-R13, which can effectively prevent workers from slipping in condensed water environment and reduce the accident rate.

Corrosion resistance
5052 H32 aluminum alloy plate is twice as tolerant to common disinfectants (such as sodium hypochlorite) in cold storage as stainless steel

Hygienic performance
The surface of 5052 H32 aluminum flat plate has no pores, the bacterial attachment rate is lower than that of concrete floor, and the cleaning efficiency is improved.
5052 H32 Anti-slip Aluminum Tread Plate specifications
|
Alloy |
5052 |
|
Temper |
F,O,H12,H14,H16 H18,H19,H22,H24,H26,H28,H111,H112,H114 etc. |
|
Thickness(mm) |
0.2-500 |
|
Width(mm) |
100-2650 |
|
Length(mm) |
500-16000 |
| Standing specifications(mm) | 1220*2440, 1250*2500, 1500*3000 |
| Surface | Bright finish, Mill finish |
| Bar difference | 1 bar (Diamond/Pointer), 2 bar, 3 bar, big/small 5 bar |

In addition to being used for cold storage floors and ship floor compartments, 5052 five-rib patterned aluminum plates can also be used in other places where anti-slip performance needs to be enhanced, such as pedestrian walkways, stair treads, industrial plants, etc.
GNEE is the one of the largest aluminum sheet and foil processing base in China. We are a comprehensive and large-scale private aluminum profile enterprise integrating R&D, production and sales of aluminum alloy product.
Phone Number
8615824687445
info@gneealu.com



Everything You Want to Know
What is the difference between 6061 and 5052 aluminum plate?
5052 aluminum has the lowest strength among the three grades, with a tensile strength of around 220 MPa. 6061 aluminum offers moderate strength, with a tensile strength of around 310 MPa. 7075 aluminum is the strongest of the three, with a tensile strength of around 572 MPa.
What is a 5052 aluminum sheet used for?
It has very good corrosion resistance, and can be easily welded as well. 5052 is not a good choice for extensive machining operations, as it has only a fair machinability rating. It is typically used in aircraft fuel and oil lines, fuel tanks, sheet metal work, appliances, lighting, wire, and rivets
How to prevent galvanic corrosion between aluminum and steel?
To prevent galvanic corrosion between aluminum and steel, you should isolate the two metals from each other using a non-conductive material. This can be achieved through various methods, including using insulating gaskets, washers, or coatings. Additionally, applying protective coatings to both metals can create a barrier against the electrolyte.
Hot Tags: 5052 h32 anti-slip aluminum tread plate, China 5052 h32 anti-slip aluminum tread plate manufacturers, 5 series Aluminum Plate, 5052 Aluminum Plate, 5083 aluminum alloy, 5083 Aluminum Plate, Fatigue strength
You Might Also Like
Send Inquiry













