Jun 18, 2025 Leave a message

5052 5182 H19 H48 Aluminum Sheet Coil for Cans End

GNEE 5052 5182 aluminum sheet coil specifications for can lid

5052 5182 Aluminum specifications for can lid Alloy 5052 5182 H19 Aluminum coil strip 5052 5182 H48 aluminum coated sheet 5052 5182 H48aluminum coated coil strip
Temper H18, H19, H36, H38, H39 H46, H48, H49 H46, H48, H49
Thickness 0.22-0.50mm 0.22-0.50mm 0.22-0.50mm
Width 500-1600mm 500-1600mm 20-1600mm
Tape inner diameter/length 300, 350, 405, 505 500-4000mm 300, 350, 405, 505
5052 5182 H48 coating density 1. The inner coating is epoxy 12-13um, and the outer coating is 4-5um epoxy resin.
2. The surface density of the single-sided DOS liquid coating of the coating plate for the tank cover is generally: 5mg/m2-10mg/m2;
3. The coating surface of the coated strip for cover material should be evenly coated with wax. The density of the wax coating is generally: 40mg/m2-100mg/m2;
5052 5182 H48 coating color Gold, Silver, Transparent
Package 1. Meet the requirements of GB/T3199 standard;
2. Export wooden pallet/box packaging;
3. Customizable according to customer requirements.
standard EN 541, EN 573-3, YS/T726-2010,GB/T 3190,GB/T3880.1-2006

If you have any questions about 5052 5182 H19 H48 Aluminum Sheet Coil for Cans End, please contact us 

 Quick Quote

hemical composition of 5052 5182 aluminum sheet coils for can lids

Element Chemical composition (%)
5182 5052
Si 0.2 0.25
Fe 0.35 0.4
Cu 0.5 0.1
Mn 0.0-0.5 0.1
Mg 4.0-5.0 2.2-2.8
Cr 0.1 0.15-0.35
Ni - -
Zn 0.25 0.1
Ti 0.1 -
Al Remainder Remainder

Physical properties of 5052 5182 aluminum sheet coils for can lids

Alloy Temper Thickness/mm Tensile Strength Rm/MPa Tensile Strength/MPa Elongation %
5052 H36, H46 >0.220-0.300 255~305 ≥200 ≥2
>0.300 -0.500 255~305 ≥200 ≥3
H18, H38, H48 >0.220 -0.300 ≥270 ≥210 ≥2
>0.300-0.500 ≥270 ≥210 ≥3
H19, H39, H49 >0.220 -0.300 290 ≥220 ≥2
>0.300-0.500 ≥290 ≥220 ≥3
5182 H36, H46 >0.220 -0.300 265 ~340 ≥270 ≥3
>0.300 -0.500 265 ~340 ≥270 ≥4
H18, H38, H48 >0.220 -0.300 330 ≥285 ≥3
>0.300-0.500 ≥330 ≥285 ≥4
H19, H39, H49 >0.220-0.300 ≥340 ≥295 ≥3
>0.300 -0.500 ≥340 ≥295 ≥4

 

5052 5182 aluminum alloys are the most widely used materials for can lids. These 5xxx series aluminum-magnesium alloys have excellent ductility and high strength, making it easy to produce lids of various sizes. The 5052-H48 temper has medium strength and can withstand the pressure of metal packaging for carbonated beverages and other gases, making it an ideal material for lid production.

5052 5182 H19 H48 Aluminum Sheet Coil for Cans End

Coating properties of 5052 5182 aluminum sheet coils for can lids

Project cover material
  Cover coating Cover inner coating
Coating surface density/(g/m') 3~6 10-13
Solvent resistance >50 times without missing the bottom -
High temperature sterilization 121℃, 30min distillation There is no whitening, loss of gloss, peeling or falling off of the inner and outer coatings.
Acid resistance 121℃, 32min acid etching - The inner coating has no whitening, loss of gloss, peeling or falling off
Sulfur resistance 121℃, 3lmin sulfur corrosion - The inner coating has no whitening, loss of gloss, peeling or falling off
Adhesion Level 1 Level 1

 

ABOUT GNEE

why choose our products

 

GNEE offers a comprehensive range of 1-8 series aluminum sheets, strips and foils with various specifications, high production capacity, sufficient inventory, competitive prices, and flexibility to meet your personalized processing requirements. Our products are CE and ISO9001 certified, and we can customize them to meet various standards such as JIS, EN, ASTM, etc. according to your specific needs. For more information, please feel free to contact us by email. GNEE is looking forward to cooperating with you!

Contact now

 

 

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry