Mar 07, 2024 Leave a message

5052 and 6061 aluminum rods

The difference between 5052 aluminum plate and 6061 aluminum plate is quite extensive, mainly due to the difference in chemical composition and casting process.

5052 aluminum plate is an AL-Mg alloy aluminum plate. Magnesium is the main alloy element in 5052 alloy aluminum plate. It is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: plasticity and corrosion resistance. It has high plasticity and cannot be strengthened by heat treatment. It has good plasticity during semi-cold work hardening and low plasticity during cold work hardening. It has good corrosion resistance and good weldability. It has poor machinability and can be polished. It belongs to the hot-rolled aluminum plate series and can be used for oxidation deep processing.

5052 and 6061 aluminum rods

The main elements of 6061 aluminum plate are magnesium and silicon, and the Mg2Si phase contains a certain amount of manganese and chromium, which can neutralize the bad effects of iron. Sometimes a small amount of copper or zinc is added to improve the strength of the alloy without making it The corrosion resistance is significantly reduced. There is also a small amount of copper in the conductive material to offset the adverse effects of titanium and iron on the conductivity. Zirconium or titanium can refine the grains and control the recrystallization structure; in order to improve the machinability, it can Add lead and bismuth. Mg2Si is solid dissolved in aluminum, giving the alloy artificial age hardening properties. It is a cold-rolled aluminum plate.

5052 and 6061 aluminum rods

5052 aluminum plate is an AL-Mg series aluminum rod. Magnesium is the main alloy element in 5052 aluminum rod. It is a widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: plasticity and corrosion resistance. It has high plasticity and cannot be strengthened by heat treatment. It has good plasticity during semi-cold work hardening and low plasticity during cold work hardening. It has good corrosion resistance and good weldability. It has poor machinability and can be polished.
The main alloying elements in 6061 alloy are magnesium and silicon. It has medium strength, good corrosion resistance, weldability, and good oxidation effect. It is widely used in various industrial structural parts that require certain strength and high anti-corrosion resistance.
5052 can bend 6061 high hardness abrasive tools, generally 6061 aluminum plates are used and the oxidation effect is fine.
Our company can produce aluminum rods of various materials and brands for you. If you need it, you can call our company at any time, and we will bring you high-quality service concepts and perfect after-sales concepts.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry