Aluminum-Tube-6082-T6-EN-AW-6082-T6-Round-tube.pdf
The top producer and supplier of 6082 T6 aluminum tubes, 6082 T6 aluminum oval tubes, and 6082 T6 aluminum square extruded tubes, GNEE Aluminum Incorporation serves a variety of sectors, including aerospace, medical, electronics, weapons, and industrial. The 6082 T6 Drawn Seamless Aluminum Alloy Tube in Tempers is a supplier of ASTM B210, ASME SB210, and ASTM B221/B235 /B241 B313 /B317 /B345 B404 /B429 /B483 /B491 /B547. It is made in compliance with international standards. GNEE Aluminium, China, is a wholesale dealer of 6082 T6 extruded aluminum tube.
Aluminium round tube EN AW 6082-T6
Grade acc. to EN 573-3
Tolerances acc. to EN 755-1, EN 755-2, and EN 755-9
A precipitation-hardenable alloy with medium strength, EN AW-6082 T6 exhibits exceptional weather resistance. Among its uses are in the building industry, heat sinks, the automobile industry, and as an electrical conductor.
The 6082 aluminum alloy belongs to the 6000 or 6xxx class of wrought aluminum-magnesium-silicon alloys. While it is not heavily included in ASTM (North American) standards, it is one of the most well-known alloys in its series (with alloys 6005, 6061, and 6063). Although it is not utilized in casting as a wrought alloy, it is usually manufactured by extrusion, cold and hot stamping, and rolling. Although it is uncommon with this alloy, it may also be forged and clad. Although it cannot be work hardened, heat treatment is frequently used to create tempers that are stronger but less ductile.
The medium-strength aluminum alloy 6082 has exceptional resistance to corrosion. Of the alloys in the 6000 class, it is the strongest. The alloy 6082 is referred to as structural. The alloy that is most frequently machined in plate form is 6082. Despite being a relatively new alloy, 6082 has replaced 6061 in many applications due to its better strength. A stronger alloy is produced when a significant quantity of manganese is added, controlling the grain structure.
| Grade: | ENAW-AlSi1MgMn |
| Number: | ENAW-6082 |
| Classification: | Aluminium – 6000 series ( Magnesium Mg and Silicon Si are major alloying elements) |
Chemical composition % of grade ENAW-AlSi1MgMn ( ENAW-6082 )
| Fe | Si | Mn | Cr | Ti | Cu | Mg | Zn | Others | – |
| max 0.5 | 0.7 – 1.3 | 0.4 – 1 | max 0.25 | max 0.1 | max 0.1 | 0.6 – 1.2 | max 0.2 | each 0.05; total 0.15 | Al – remainder |
Mechanical properties of grade ENAW-AlSi1MgMn ( ENAW-6082 )
| Rm – Tensile strength (MPa) (O) (H111) | 160 |
| Rm – Tensile strength (MPa) (T4) | 205 |
| Rm – Tensile strength (MPa) (T6) | 270-310 |
Equivalent grades of grade ENAW-AlSi1MgMn ( ENAW-6082 )
Warning! Only for reference
| EU EN |
Germany DIN, WNr |
||
| ENAW-AlSi1MgMn |
|
Aluminum Tube 6082 T6 has good processing properties and is widely used in automotive and construction shipbuilding.
What is the difference between 6061 T6 and 6082 T6 aluminum?
Strength: In general, 6082 T6's tensile strength is somewhat greater than 6061 T6's. In applications that need for extra strength and durability, this might be a significant consideration. Corrosion Resistance: Although 6061 T6 is marginally superior to 6061 T6, both alloys have strong corrosion resistance.
