Anti-rust aluminum plates are used more and more widely in life, and we should know more about anti-rust aluminum plates. So how to deal with adhesive marks on rust-proof aluminum panels? The cleaning steps for rust-proof aluminum plates are as follows:
1. Rinse the surface of the anti-rust aluminum plate with plenty of water.
2. Use a soft cloth impregnated with anti-rust aluminum detergent diluted in water to gently wipe it on the surface of the board.
3. Rinse the surface of the anti-rust aluminum plate with plenty of water and clean away the dirt.
4. Check the surface of the rusty aluminum plate and focus on cleaning the areas that are not clean with detergent.
5. Rinse the surface of the anti-rust aluminum plate with clean water until the detergent is completely washed away.
In addition, I would like to remind you not to wash the anti-rust aluminum of the hot plate (temperature exceeds 40°C), because excessive evaporation of water will be harmful to the surface! Also note that when choosing the right detergent, you must use a neutral detergent! Do not use strong alkaline detergents such as sodium hydroxide, potassium hydroxide or sodium carbonate, strong acid detergents, abrasive detergents and detergent-soluble coatings.
The method of cleaning rust-proof aluminum plate is as follows:
Use mild detergent and soft cloth. Pour the cleaner onto a damp cloth and gently wipe the surface of the aluminum plate to remove dirt or oil stains.
Use vinegar or lemon juice. Apply vinegar or lemon juice to the surface of the aluminum plate, let it sit for a while, and then wipe it with a damp cloth.
Use bleach. First dilute the bleach to an appropriate concentration, then use a brush or sponge dipped in bleach to gently wipe the surface of the aluminum plate, and finally rinse thoroughly with clean water.
Use aluminum cleaner. According to the instructions of the cleaner, use an appropriate amount of aluminum cleaner, wipe the surface of the aluminum plate as directed, and finally rinse with clean water.
