Comparison-between-1050-and-1060-aluminum-plates.pdf
Comparison between 1050 and 1060 aluminum plates
The two primary items in the 1000 series are 1060 and 1050 aluminum plates. Since these two products are so similar, they can frequently be used in place of one another. The three key distinctions between 1060 and 1050 aluminum plates will be thoroughly examined and explained today. When buying aluminum plates, I hope it will help you better grasp some of the material.
Introduction to 1060 aluminum plate
One of the most popular aluminum plate products in the 1000 series is the 1060 aluminum sheet. 1060 aluminum plate is also frequently referred to as pure aluminum plate since the aluminum content is typically higher than 99.60%. The technology and process level of 1060 aluminum plate, a frequently used series product in the 1000 series, are both comparatively stable and advanced. Since there are numerous producers of 1060 aluminum plate, it is one of the most popular aluminum plates in the 1000 series.
Introduction to 1050 aluminum plate
The 1000 series of aluminum plates includes the 1050 series as well. Given that the density of 1060 aluminum plate is higher than 99.60%, it is easy to infer that 1050 aluminum plate has an Arabic numeral of 50, indicating that its aluminum content is higher than 99.50%. The market typically prefers to use 1060 aluminum plate in place of 1050 aluminum plate because it is also a member of the 1000 series. Since 1050 aluminum plate and 1060 aluminum plate have identical performance, alloy, tensile strength, elongation, etc. Furthermore, the makers of 1050 aluminum plate are rather few, making them essentially interchangeable.
Aluminum Sheet / Plate Specification
| Item | Description |
|---|---|
| Standards | ASTM B209 / ASME SB209 |
| Type | Hot-Rolled (HR) / Cold-Rolled (CR) Sheet |
| Temper | O, H12, H14, H16, H18, H19, H22, H24 |
| Thickness (mm) | 0.2 – 50 |
| Width (mm) | 100 – 2600 |
| Length (mm) | 500 – 10000 |
| Surface Finish | Bright, Polished, Hair Line, Brush, Sand Blast, Embossed, Etching, etc. |
| Finish | Mill Finish / Customer Specific Finish |
| Coating Options | PVC Coated, Color Coated, Polyester, Fluorocarbon, Polyurethane, Epoxy Coating |
Comparison between 1050 and 1060 aluminum plates
The first difference is the composition of the alloy.
More than 99.60% of 1060 aluminum plates and more than 99.50% of 1050 aluminum plates are made of aluminum. However, copper is absent from 1050 aluminum plate. For instance, 1060 aluminum plates have a copper percentage of 0.05, but 1050 aluminum plates have no copper at all. The alloy composition of 1060 and 1050 aluminum plates differs in the following ways.
Distinction 2: Distinction in Application
As previously stated, 1060 and 1050 aluminum plates are essentially interchangeable, and it is even possible to argue that 1060 aluminum plates can fully replace 1050 aluminum plates. Additionally, 1050 aluminum plate has the benefits of consistent conductivity, good performance, and low density. Products with modest strength needs or high stretching and stamping requirements are the primary applications for 1060 aluminum plate. High-speed traffic signs, building exterior wall signs, kitchen tools, battery plugs, fan blades made of aluminum alloy, etc. are a few examples. Although the applications of 1050 and 1060 aluminum plates are essentially the same, 1050 aluminum plate is utilized extensively in export. or example, it is widely used in radiators, reflective panels, decorative panels, etc.
Third Distinction: Performance Distinction
1050 aluminum plate has a tensile strength performance of 60-100 data values, an elongation performance of ≥23, and a yield performance of ≥25. 1060 aluminum plate has an elongation of 3-5 data and a tensile strength performance of 110-136 data. The performance data surface makes it easy to see the 1050 aluminum plate's performance advantages. As a result, 1060 aluminum plate can be utilized in place of 1050 aluminum plate if there is a performance difference because the actual difference between the two is not that great. Nothing is wrong.
The three primary distinctions between 1060 and 1050 aluminum plates that manufacturers have introduced are listed above. I hope you find it useful. Both 1060 and 1050 aluminum plate alloys are frequently seen in daily life, with 1060 being the most prevalent. Thus, having a solid grasp of the distinctions between the two will enable you to select aluminum plates more effectively and successfully apply the appropriate kind of aluminum plate to the proper items!
