Dec 23, 2025 Leave a message

How-Strong-Is-7075-Aluminum.pdf

How Strong Is 7075 Aluminum

 

How strong is 7075 aluminum?

7075 aluminum alloy is renowned for its exceptional strength, offering a tensile strength of over 572 MPa while maintaining a low density of approximately 2.8 g/cm³. By comparison, 304 stainless steel delivers a tensile strength of about 621 MPa but has a much higher density of 8 g/cm³. This means that, at the same volume, 7075 aluminum provides nearly 90% of the strength of 304 stainless steel while weighing only about one-third as much. As a result, 7075 aluminum is an excellent choice for applications that demand both high strength and lightweight performance.

 

How does a 7075 aluminum tube perform at high temperatures?

7075 aluminum tubes perform reliably in elevated-temperature environments, with a melting point of no less than 477°C and a thermal conductivity of approximately 130 W/m·K. These properties make them suitable for high-temperature applications in aerospace and industrial sectors. However, exposure beyond recommended temperature limits should be avoided, as excessive heat can lead to a reduction in mechanical performance.

7075 Aluminum

Can a 7075 aluminum tube be bent?

Due to its high hardness, bending 7075 aluminum tube can be difficult and may result in cracking. To reduce the risk of damage, bending is typically recommended before heat treatment is applied.

GNEE provides aluminum tube bending services along with a complete range of secondary processing options, including surface finishing, heat treatment, forming, bending, and CNC machining-offering a comprehensive one-stop solution for project requirements.

 

Can 7075 aluminum tube be welded?

7075 aluminum tube has relatively poor weldability, and welding can significantly compromise its corrosion resistance. In most cases, MIG welding is considered the preferred method, while gas welding and arc welding are generally not recommended.

 

7005 aluminum tube vs. 7075 aluminum tube

Both 7005 and 7075 belong to the 7000 series aluminum alloys and are primarily alloyed with zinc, sharing approximately 96% compositional similarity. However, 7075 clearly outperforms 7005 in strength.

Property 7005 Aluminum Tube 7075 Aluminum Tube
Composition Lower zinc and copper content Higher zinc and copper content
Strength Lower tensile strength Very high tensile strength, comparable to some steels
Hardness Lower hardness (≈94 HB) Higher hardness (≈150 HB)
Weldability Good, suitable for welded structures Poor, not ideal for welding
Corrosion Resistance Good Good, slightly lower than 7005
Applications Bicycle frames, automotive parts, structural components Aerospace components, aircraft structures, high-stress parts

In addition to 7075 and 7005 aluminum tubes, GNEE also supplies other high-performance aluminum tubing solutions, including 5052, 5083, and 6061 aluminum tubes. Please contact us to discuss your specific application needs.

Contact now

 

How is the price of 7075 aluminum tube determined?

As a premium high-strength aluminum alloy, 7075 aluminum tube pricing varies significantly depending on the production process, dimensions, wall thickness, and tolerance requirements. Key pricing factors include:

Standard extruded 7075 aluminum tubes: comparatively economical

Reverse-extruded seamless 7075 aluminum tubes: higher cost due to process complexity

Thin-wall 7075 aluminum tubes for telescopic tent poles require multiple drawing steps, increasing cost

Forged 7075 aluminum tubes for aircraft landing gear involve repeated forging to meet strict mechanical standards, resulting in higher pricing

Large-diameter 7075 aluminum tubes (OD > 1200 mm) for nuclear power applications: produced using ultra-large vertical extrusion presses (up to 50,000 tons), significantly increasing production costs

 

What support does GNEE offer metal distributors?

GNEE maintains a strong inventory of aluminum tubes, including standard sizes of 6061 and 6063 aluminum tubing, ensuring a stable and dependable supply chain. All products comply with international standards to guarantee consistent quality and performance. For distributors placing bulk orders, we provide competitive rebate and discount programs, helping you reduce procurement costs and strengthen your market competitiveness.

 

How can retailers order 7075 aluminum tubes from GNEE?

GNEE supports combined orders covering multiple sizes and specifications. As long as you can manage customs clearance and local pickup, simply provide the required outer diameter, wall thickness, alloy, and temper, along with your preferred packaging, payment terms, and delivery schedule. Our team will take care of the rest, supported by reliable after-sales service to ensure a smooth purchasing experience.

7075-aluminum

 

Export Control Compliance Notice - High-Strength Aluminum Alloys

Certain high-strength aluminum alloy products supplied by GNEE are subject to the export control regulations of the People's Republic of China for dual-use items and technologies. Under these regulations, the export, re-export, or transfer of such items generally requires an export license issued by the competent Chinese authorities. Unlicensed export of the controlled item categories is prohibited.

The alloys listed in the table below represent product categories commonly affected by these controls. Whether a specific inquiry or order is controlled depends on the alloy grade, temper, product form, dimensions, quantity, and intended end-use.

Alloy Grade

Common Temper(s)

Tensile Strength (MPa) - Reference

7075

T6 / T651

540 – 570

7075

T73 / T7351

485 – 500

7075

T76 / T7651

500 – 515

7050

T7451 / T6

475 – 620

2024

T351 / T4

425 – 470

7A04

T6

≥ 530

2014

T6

≈ 460 – 500

2017

T4

≈ 390 – 480 (some specifications may reach higher)

2195

-

≈ 572

7068

-

≈ 623

7055

-

≈ 654

7150

-

≈ 643

GNEE does not export to parties or destinations prohibited under applicable export control and international sanctions laws.

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry