Get Reliable 1050 Aluminum Coil from GNEE
Looking for a high-purity, cost-effective aluminum solution for electrical, industrial, or decorative applications? GNEE supplies premium 1050 aluminum coil with stable quality, multiple tempers, and flexible customization. Contact GNEE today for a fast quote and technical support.
What Is 1050 Aluminum Coil
1050 aluminum coil is a wrought, commercially pure aluminum product containing at least 99.5% aluminum. It belongs to the 1000-series aluminum alloys, which are well known for excellent corrosion resistance, high electrical and thermal conductivity, and superior formability, while offering relatively low mechanical strength.
1050 aluminum coil cannot be strengthened by heat treatment. Its strength is adjusted only through cold working, and it is supplied in a wide range of tempers such as O, H12, H14, H16, H18, H22, and H24. Typical thickness ranges from 0.10 mm to 8.0 mm, with widths up to 2650 mm. Surface finishes include mill finish, polished, brushed, embossed, anodized, or coated (PVDF, PE, etc.), and production complies with international standards, including ASTM, EN, JIS, and GB.
Thanks to its ductility and conductivity, 1050 aluminum coil from GNEE is widely used in electrical components, chemical equipment, signage, decorative panels, and heat exchangers.
1050 Aluminum Coil Specifications
1050 Aluminum Coil Basic Specifications
| Item | Description |
|---|---|
| Alloy | 1050 (AA1050; EN AW-1050A is the European designation with slightly different limits) |
| Temper | O, H12, H14, H16, H18, H19, H22, H24, H26, H28 |
| Thickness | 0.10 – 8.0 mm (common: 0.2 – 6.0 mm) |
| Width | 20–2650 mm (common: 500–2500 mm) |
| Coil Inner Diameter | 150 mm / 300 mm / 505 mm (custom available) |
| Coil Outer Diameter | ≤ 2000 mm (depends on thickness & weight) |
| Shape | Coil / Strip / Roll |
| Surface Finish | Mill, polished, brushed, embossed, anodized, coated |
| Standards | ASTM B209, EN 573, EN 485, ISO 6361, JIS H4000, GB/T 3190, GB/T 3880 |
| Packaging | Seaworthy export packing with moisture protection |
1050 Aluminum Coil Stock Range
| Thickness (mm) | Width (mm) | Typical Temper/Finish |
|---|---|---|
| 0.10 – 0.50 | 400 – 1600 | Various (CTP / PS plates) |
| 0.12 – 0.50 | 600–1500 | O – H112, mill finish |
| 0.15 – 6.0 | Custom | Multiple tempers |
| 0.20 – 8.0 | 500 – 2500 | Industrial use |
| 0.20 – 8.0 | 20 – 2300 | O, H12, H14, H16, H18, H22, H24, H26 |
| Custom | 1000 / 1200 / 1500 | Brushed, mirror, embossed, coated |
1050 Aluminum Coil Chemical Composition
| Element | Content (%) |
|---|---|
| Aluminum (Al) | ≥ 99.50 |
| Silicon (Si) | ≤ 0.25 |
| Iron (Fe) | ≤ 0.40 |
| Copper (Cu) | ≤ 0.05 |
| Manganese (Mn) | ≤ 0.05 |
| Magnesium (Mg) | ≤ 0.05 |
| Zinc (Zn) | ≤ 0.07 |
| Titanium (Ti) | ≤ 0.05 |
| Others (each) | ≤ 0.03 |
| Others (total) | ≤ 0.15 |
1050 Aluminum Coil Mechanical Properties
| Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
|---|---|---|---|
| O | 70–100 | ≥ 20 | 35–40 |
| H12 | 95–130 | ≥ 60 | 20–25 |
| H14 | 110–145 | ≥ 95 | 7 – 12 |
| H16 | 125–160 | ≥ 115 | 5–10 |
| H18 | 145–180 | ≥ 135 | 3–5 |
1050 Aluminum Coil Characteristics
1050 aluminum coil is lightweight, nonmagnetic, and highly reflective. Its high aluminum purity provides:
- Excellent corrosion resistance
- High electrical and thermal conductivity
- Outstanding formability and surface quality
- Easy anodizing, polishing, brushing, embossing, or coating
These properties make 1050 aluminum coil ideal for applications where strength is not critical but ductility, conductivity, and appearance are essential.
1050 Aluminum Coil Applications
| Industry | Typical Uses |
|---|---|
| Electrical | Conductors, busbars, transformers |
| Chemical | Tanks, pipelines, corrosion-resistant equipment |
| HVAC | Heat exchangers, air-conditioning components |
| Construction | Decorative panels, cladding, signage |
| Lighting | Reflectors, lamp housings |
| Consumer Goods | Kitchenware, utensils, packaging materials |
| Industrial | Sheet-metal parts, stamped components |
1050 Aluminum Coil Tempers Supplied by GNEE
GNEE supplies 1050 aluminum coil in a full range of tempers, from soft annealed O temper to hard cold-worked conditions such as H18, H24, H26, and H28, meeting different forming and processing requirements.
Verify the standard (ASTM/EN/JIS/GB) and temper against your forming operation;
Check residual rolling-oil level if coating or printing follows;
Confirm flatness/wave, coil ID, width tolerance, and seaworthy moisture-protected packaging.
Request the mill certificate with composition and mechanical data.
