What Is 3105 Painted Aluminum Sheet
3105 painted aluminum sheet is a colour-coated flat product built on a 3105 aluminium-manganese substrate. The coil is degreased, chemically pre-treated and then finished with a roller-applied organic coating on one or both sides, so the material arrives ready for fabrication without any downstream painting operation. The manganese addition gives 3105 noticeably better corrosion resistance and formability than the 1100 or 1050 grades, while the coating system supplies the colour, gloss and weatherability that exposed architectural and advertising parts demand.
For a B2B buyer the specification has two halves that must be controlled and inspected separately: the metallurgical condition of the base coil and the coating system applied on top of it. A quotation that names only a colour and a thickness is incomplete, because two suppliers can deliver the same colour on very different substrates and coating chemistries.
Base Metal Composition and Metallurgical Standards
The substrate is normally ordered to ASTM B209, EN 573-3 or GB/T 3880. These standards register 3105 with manganese in the range 0.30-0.80%, magnesium 0.20-0.80%, silicon up to 0.60%, iron up to 0.70%, copper up to 0.30% and zinc up to 0.40%. The manganese content is what separates 3105 from a commercially pure 1050 or 1060 sheet: it raises strength moderately and, more importantly, improves resistance to atmospheric and fresh-water corrosion, which is why the alloy dominates painted sheet markets.
Strain-hardened tempers from H12 through H28 are common, and H46 is available for applications needing maximum stiffness in a thin gauge. Tensile strength rises with the temper while elongation falls, so the temper must be selected against the forming operation. Deep-drawn appliance housings and complex sign lettering normally call for H22 or H24, where the material still has enough elongation to survive bending without cracking.
Supply Specifications and Coating Systems
| Item | Typical supply range |
|---|---|
| Alloy | 3105 (Al-Mn) |
| Temper | H12, H14, H16, H18, H22, H24, H26, H28, H46 |
| Thickness | 0.15 mm - 1.5 mm |
| Width | 100 mm - 2650 mm |
| Coil inner diameter | 405 mm / 505 mm / 508 mm |
| Coating type | Polyester, silicon-modified polyester, fluorocarbon (PVDF) |
| Coating thickness | Top 18-28 micrometres, back coat 5-12 micrometres |
| Surface finish | Smooth, stucco embossed, brushed, wood or stone pattern print |
Polyester is the economical option and handles interior work and sheltered exteriors well. Fluorocarbon systems based on a PVDF resin matrix keep colour and gloss far longer under strong ultraviolet exposure and are the usual choice for curtain wall and coastal cladding. Coating adhesion and durability are evaluated with the test methods of the EN 13523 coil-coating series, and high-performance architectural coatings are commonly qualified against the performance levels of AAMA 2605.
Typical Applications
Advertising signs, light boxes and shop-front fascias
Architectural cladding, roofing sheets, ceiling and soffit panels
Appliance panels, refrigerator and washing machine side walls
Kitchen cabinet doors and modular furniture facing
Truck body panels, trailer linings and container trim
Electrical enclosures and machine covers
Ordering, Processing and Quality Control Points
Three checks decide whether a painted coil performs in service. The first is pre-treatment: a proper chromate-free or chrome-based conversion layer is what stops the coating from lifting at cut edges and bends. Buyers can verify it with a T-bend test, where 0T to 2T is a normal acceptance level for architectural work, and with an impact or cupping test on the coated panel.
The second is corrosion performance. Neutral salt spray testing to ASTM B117 is the routine screen: polyester systems are usually expected to exceed 1000 hours, while fluorocarbon systems are qualified in the 3000-4000 hour class. The third is mechanical and dimensional confirmation of the substrate, covering chemical composition, tensile properties, thickness tolerance and flatness, supported by a mill certificate issued to EN 10204 3.1 when the end user needs traceability.
Sheets should be cut and formed with the protective film in place, and film left on stored panels can migrate adhesive under heat, so removal within the supplier's recommended window matters. Bending radius, blanking burrs and edge sealing all influence how long a painted edge resists corrosion in coastal or polluted atmospheres.
Frequently Asked Questions
Q: What is the difference between 3105 painted sheet and 1050 painted sheet?
A: 3105 contains manganese in the 0.30-0.80% range, which raises strength and improves corrosion resistance compared with the commercially pure 1050 substrate. It is preferred for exterior cladding and signage, while 1050 is often chosen for interior decorative work.
Q: Which coating should be used for an outdoor architectural project?
A: Fluorocarbon (PVDF) coatings are the standard choice for exposed facades because they retain colour and gloss much longer under ultraviolet light. Polyester remains adequate for sheltered or interior applications.
Q: What tempers are available and how do I choose one?
A: H12 to H18 are the harder strain-hardened tempers used where stiffness matters, while H22 to H28 are partially annealed and easier to bend and draw. Choose the hardest temper that still survives the tightest bend in the part.
Q: How is the coating durability verified before shipment?
A: Suppliers normally report coating thickness, gloss, T-bend adhesion, impact resistance and neutral salt spray hours to ASTM B117, together with substrate tensile results and a material certificate to EN 10204 3.1 on request.
Q: Can the sheet be embossed or printed with a wood grain?
A: Yes. Stucco embossing and wood or stone pattern printing are standard options applied to the coating line, and they add surface texture and scratch hiding without changing the alloy or temper.
Q: What thickness and width can be supplied?
A: Painted 3105 coil and sheet are typically produced from 0.15 mm to 1.5 mm thick and up to 2650 mm wide, which covers most cladding, signage and appliance panel formats.





