1050 H14 Aluminium Sheet Plate Overview | GNEE Supplier
If you are searching for a reliable, cost-effective aluminum material with excellent corrosion resistance and workability, 1050 H14 aluminum sheet plate from GNEE is an ideal solution. As a professional aluminum supplier, GNEE delivers high-quality 1050 H14 aluminum sheets and plates that meet international standards and serve a wide range of industrial applications. Contact GNEE today to receive technical guidance and a competitive quotation.
What Is a 1050 H14 Aluminum Sheet Plate?
1050 H14 aluminum sheet plate is a commercially pure aluminum alloy containing a minimum of 99.5% aluminum. It belongs to the non-heat-treatable 1000 series and achieves its strength through strain hardening, rather than heat treatment.
The H14 temper indicates that the material has been cold-worked to a half-hard condition, placing its strength level between fully annealed (O temper) and full-hard (H18 temper). This balance provides moderate strength while maintaining excellent ductility and formability. Under European standards, this alloy is commonly designated as 1050A-H14.
Chemical Composition of 1050 H14 Aluminium Sheet Plate
1050 H14 aluminum sheet plate is essentially unalloyed aluminum, with only trace elements present.
Chemical Composition Table – 1050 H14 Aluminium Sheet Plate
| Element | Typical Content (%) |
|---|---|
| Aluminum (Al) | ≥ 99.5 |
| Iron (Fe) | ≤ 0.40 |
| Silicon (Si) | ≤ 0.25 |
| Others (Total) | ≤ 0.15 |
Key Properties of 1050 H14 Aluminium Sheet Plate
-
Corrosion Resistance of 1050 H14 Aluminium Sheet Plate
This alloy offers excellent corrosion resistance, making it suitable for industrial, environmental, and mildly marine conditions where durability and long service life are required.
-
Formability of 1050 H14 Aluminium Sheet Plate
Thanks to its high ductility, the material can be easily bent, formed, rolled, or stamped without cracking, making it ideal for sheet metal fabrication.
-
Conductivity of 1050 H14 Aluminium Sheet Plate
1050 H14 aluminum sheet plate provides good thermal and electrical conductivity, supporting its use in electrical and heat-transfer applications.
-
Reflectivity of 1050 H14 Aluminium Sheet Plate
The alloy delivers a high-quality, reflective surface finish, making it well suited for lighting reflectors and decorative applications.
-
Strength Level of 1050 H14 Aluminium Sheet Plate
This grade offers low to moderate mechanical strength, which is sufficient for general industrial use but not intended for heavy load-bearing structural applications.
Mechanical Properties of 1050 H14 Aluminium Sheet Plate
Mechanical Properties Table – 1050 H14 Aluminium Sheet Plate
| Property | Typical Range |
|---|---|
| Tensile Strength | 75–105 MPa |
| Yield Strength | 35–75 MPa |
| Elongation | 20%–35% |
| Hardness (HB) | 28–36 |
| Heat Treatable | No |
Values may vary depending on thickness and production method.
Common Applications of 1050 H14 Aluminium Sheet Plate
1050 H14 aluminum sheet plate is widely used in applications where corrosion resistance, cleanliness, and formability are critical:
- Chemical processing equipment
- Containers for food and chemical industries
- Lighting reflectors and lighting components
- Architectural flashings
- Cable sheathing and protective coverings
Its purity and stability make it especially suitable for environments requiring hygiene and resistance to chemical exposure.
Fabrication and Welding of 1050 H14 Aluminium Sheet Plate
Fabrication Performance of 1050 H14 Aluminium Sheet Plate
The alloy is easy to fabricate using standard sheet-metal techniques such as cutting, bending, rolling, and deep drawing.
Welding Characteristics of 1050 H14 Aluminium Sheet Plate
1050 H14 aluminum sheet plate demonstrates excellent weldability, including gas welding, arc welding, and resistance welding. For self-welding applications, 1100 aluminum filler wire is commonly recommended to achieve optimal weld quality.
Why Choose GNEE 1050 H14 Aluminum Sheet Plate?
As a trusted aluminum supplier, GNEE provides stable quality, strict inspection, and flexible supply options for 1050 H14 aluminum sheet plates. Our products meet international standards and are suitable for chemical, food, lighting, and architectural industries worldwide.
Contact GNEE for 1050 H14 Aluminium Sheet Plate
Whether you need standard sheets or customized aluminum plate solutions, GNEE is ready to support your project with professional service and competitive pricing.
Contact GNEE today to request a quote, technical datasheet, or expert consultation for 1050 H14 aluminum sheet plate.
