When processing aluminum furniture and aluminum parts, you need to purchase aluminum plates. 1100 aluminum plates are often settled by weight. Here we will explain the calculation of the weight of aluminum plates, hoping to help friends in need.
Measurement:
Friends who have the conditions can use a vernier caliper to measure the thickness of the aluminum plate, which is more accurate;
It doesn't matter if you don't have it, when it crosses 4 mm, place the aluminum plate on a flat surface, measure its thickness with a ruler close to the aluminum plate, and record the measurement. The length and width can be measured along both sides of the aluminum plate with a tape measure, and the measurement results are recorded.
1100 aluminum plate weight calculation
1. Calculation formula
Aluminum plate weight = thickness * width * length * aluminum plate density
2. Aluminum plate density
The density of pure aluminum is 2.7*10 kg/m or 2.7 g/cm.
3. Example
Assume that the volume of an aluminum plate 728 mm long, 3 80 mm wide, and 3.0 mm thick is v: v=3.0 mm*0.728*0.3 8
1100 aluminum plate weight: v*2.7g/cm_u=2.24kg
If the theoretical calculation is carried out strictly according to the table, the result is often lighter than the actual weight, because the actual thickness and size of the aluminum plate are not so accurate, and the coating of the aluminum plate will also affect the actual weighing. Theoretical calculations only provide a rough reference.
How to bend 1100 aluminum plate? Next, the editor will share with you the method of bending aluminum plates. I hope it can help you!
If you want to bend aluminum, you must comprehensively consider the various properties of the aluminum plate. So from what aspects should you look at whether the aluminum plate can be bent?
We should first consider the hardness. Obviously, the 1100 aluminum plate that is too hard cannot be bent artificially or with small devices. If the hardness of the aluminum plate is small, larger iron pliers can be used. Also consider the thickness of the aluminum plate. If it is too thick, you can only bend it with an instrument. If it is not thick, you can also use small iron pliers to bend it. You can also consider the degree of bending you want. If the bending is not large, you can use iron pliers. You must learn to look at the grain of the aluminum plate. It will be easier to bend the aluminum plate according to the grain on the 1100 aluminum plate.
