The aluminum plate flat opening line is a set of aluminum plate equipment used for flattening aluminum plates. In order to achieve good efficiency when using it, the following editor introduces the operation and management system that skilled personnel who use this flat opening should follow.
1. Wear full labor protection equipment before taking up the job. Operators must strictly abide by equipment technical regulations and safety operating procedures, as well as equipment management systems. Strictly leave the position without authorization or hand over the work of this position to other positions.
2. Before the aluminum plate leveling operation, it must be clear whether the personnel in other positions are present. It is strictly prohibited to carry out the operation when there are insufficient personnel. Before starting the machine, check whether the overall fasteners of the equipment are stable, all lubricating parts and hydraulic oil pipelines must meet production standards, all electrical systems are in good condition, and all safety devices are safe, sensitive, and effective. After confirmation, start the machine and start dry running, and then Make it clear that the equipment is running normally, normal operations are allowed, and operations with hidden diseases are strictly prohibited.
3. Place the coil in the middle of the soft seat to prevent the coil from sliding, injuring people or damaging equipment. The coil should be placed in a safe position to avoid squeezing.
4. It is strictly prohibited to stand next to the feeding trolley of the aluminum plate flattening machine or the decoiler. Operators must strictly obey the instructions when loading materials to ensure the safety of loading. During loading operations, press the "up" and "forward" buttons strictly at the same time to prevent The steel coil rolled down. Wear gloves when removing the steel coil strapping to prevent being scratched by the steel coil. When removing the strap, make sure there is no one around to prevent the strapping and steel head from rebounding and injuring people.
5. When the rough leveler is feeding materials, it is strictly prohibited to stand between the uncoiler leader device and the rough leveler.
