What is 5754 Aluminum Tread Plate?
A 5754 aluminum tread plate (also known as aluminum checker plate or aluminum floor plate) is a specialized non-slip metal sheet. Made from a high-quality Aluminum-Magnesium (Al-Mg) alloy, it features a raised pattern on one side to provide excellent slip resistance.
In the industrial and transportation sectors, 5754 is widely recognized as the premium material for heavy-duty flooring. It offers a perfect combination of medium-to-high structural strength, outstanding corrosion resistance, and excellent weldability. Whether you are building commercial vehicle bodies or industrial walkways, 5754 aluminum tread plates provide long-lasting safety and durability.
Why Use a 5754 Aluminum Sheet for Flooring?
- Excellent Anti-Slip Performance: The raised patterns (such as diamond or 5-bar) create high friction, keeping workers safe in wet, oily, or muddy conditions.
- High Load-Bearing Capacity: It is stronger than basic 3000-series aluminum, meaning it can support forklifts, heavy cargo, and constant foot traffic without easily denting.
- Corrosion & Rust Resistance: Because it contains magnesium, 5754 does not rust. It is ideal for outdoor use, marine environments, and refrigerated trucks where moisture is always present.
- Lightweight Efficiency: It is only about one-third the weight of steel. For truck and trailer manufacturers, replacing steel floors with 5754 aluminum reduces the vehicle's dead weight, saving fuel and increasing legal payload capacity.
- Easy Fabrication: It is easy to cut, bend, and weld using standard MIG or TIG welding methods.
Chemical Composition of 5754 Aluminum
The magnesium (Mg) content is the key to its strength and rust resistance.
| Element | Content (%) |
| Aluminum (Al) | Balance |
| Magnesium (Mg) | 2.6 – 3.6 |
| Manganese (Mn) | ≤ 0.50 |
| Silicon (Si) | ≤ 0.40 |
| Iron (Fe) | ≤ 0.40 |
| Chromium (Cr) | ≤ 0.30 |
| Zinc (Zn) | ≤ 0.20 |
| Copper (Cu) |
≤ 0.10 |
Mechanical Properties of 5754 Aluminum
For flooring, you need material that won't easily bend under weight. The H111 and H22 tempers are the most popular choices for structural floors.
| Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
| O (Annealed) | 160 – 220 | ≥ 80 | ≥ 12 |
| H111 | 190 – 240 | ≥ 100 | ≥ 10 |
| H22 | 220 – 270 | ≥ 140 | ≥ 8 |
Physical Properties of 5754 Aluminum
| Property | Typical Value |
| Density | 2.67 g/cm³ |
| Elastic Modulus | 70 GPa |
| Thermal Conductivity | ~130 W/m·K |
The Product Specification of 5754 Aluminum Tread Checkered Plate Sheet
| Alloy | 5754 |
| Temper | O, H12, H14, H16, H18, H22, H24, H26,H32, H34, H36, H38, H111, H112, H114, H224 |
| Thickness(mm) | 0.8-8.0 |
| Width(mm) | 300-2650 |
| Length(mm) | 500-16000 |
| Surface | Bright finish, Mill finish |
| Bar difference | 1 bar (Diamond/Pointer), 2 bar, 3 bar, big/small 5 bar |
| Weight | about 2.5 tons per pallet |
| Standard product | EN-1386,ASTM,GBT,JIS |
| Protection | Paper interlayer |
| Available Dimension | ||
| Mill finish Surface | Bright finish Surface | |
| Thickness (mm) | 1.00---6.50mm | 1.20---6.50mm |
| Pattern height | Sheet Thickness from 1.0mm to 2.0mm, bar height: 0.50mm | Sheet Thickness from 1.0mm to 2.0mm, bar height: 0.50mm |
| Sheet Thickness from 1.0mm to 2.0mm, bar height: 1.00mm | Sheet Thickness from 1.0mm to 2.0mm, bar height: 1.00mm | |
| Sheet Thickness above 2.0mm, bar height: 1.50mm | Sheet Thickness above 2.0mm, bar height: 1.50mm | |
| Width (mm) | Maximum 2650mm | Maximum 2650mm |
| Length (mm) | max 6000mm for sheet or as require d for coil | max 6000mm for sheet or as required for coil |
| Paper interleaves | On request for selected | On request for selected |
| Normal size | 1200×2400mm, 1219×2438mm, 1219×3048mm | 1200×2400mm, 1219×2438mm, 1219×3048mm |
GNEE supplies custom-cut 5754 aluminum tread plates to match your exact floor dimensions. Send us your Thickness, Width, Length, and Pattern Type, and our team will provide a fast, accurate price quote based on today's SMM aluminum rates.
Email GNEE Now for a Free Project Quote
5754 aluminum Tread plate Pattern Types Explained
The surface pattern is not just for decoration; it defines the grip level and cleaning difficulty. GNEE offers several pattern options for 5754 aluminum checker plates:
| Pattern Type | Key Features | Best Industrial Application |
| 5-Bar (Standard) | Maximum grip, arranged in groups of 5 blocks. | Truck beds, heavy-duty trailers, marine decks. |
| 3-Bar | Moderate grip, easy to wash down. | Light vehicle floors, food industry walkways. |
| 2-Bar | Basic anti-slip, clean appearance. | Cold room floors, elevator floors. |
| Diamond (1-Bar) | Decorative look with functional grip. | Industrial stairs, toolboxes, wall protection. |
Industry Tip: If you are building a heavy freight truck or an outdoor platform, the 5-bar pattern is the global industry standard for maximum safety and durability.
Thickness Guide for 5754 aluminum Flooring sheet Applications
Choosing the right thickness is critical. If it is too thin, the floor will warp. If it is too thick, you waste money and add unnecessary weight.
- Light-Duty (2.0 mm - 3.0 mm): Used for pedestrian walkways, ambulance floors, and decorative wall panels.
- Medium-Duty (3.0 mm - 4.5 mm): The standard choice for pickup truck beds, delivery vans, and general warehouse stairs.
- Heavy-Duty (5.0 mm - 6.0 mm+): Required for heavy freight trailers, ship decks, and factory floors that handle small forklifts or heavy carts.
5754 vs 3003 vs 5052 Aluminum Tread Plate
Mechanical Properties Comparison
| Property | 3003-H14 | 5052-H32 | 5754-H111 / H32 |
|---|---|---|---|
| Tensile Strength (MPa) | 140 – 180 | 210 – 260 | 220 – 280 |
| Yield Strength (MPa) | 40 – 80 | 130 – 180 | 100 – 200 |
| Elongation (%) | ≥10 | ≥12 | ≥12 |
| Brinell Hardness (HB) | ~40 | ~60 | 65 – 75 |
| Fatigue Strength | Low | Medium | High |
| Corrosion Resistance | Good | Very Good | Excellent (Marine-grade) |
Application Comparison
| Industry | 3003 Tread Plate | 5052 Tread Plate | 5754 Tread Plate |
|---|---|---|---|
| Logistics & Trucking | Not recommended | Light-duty cargo vans | Heavy-duty truck floors, container flooring |
| Tanker Transportation | Not used | Rarely used | Oil tankers, fuel tankers, chemical tanker trucks |
| Railway Transport | Not used | Interior panels | Freight car floors, railway platforms |
| Marine & Offshore | Not used | Small boats, covers | Ship decks, offshore platforms |
| Construction | Temporary walkways | Medium-load platforms | Heavy machinery platforms, scaffolding flooring |
| Warehousing | Light-duty flooring | Medium-duty racks | Forklift traffic floors, industrial flooring |
| Decoration | Wall panels, ceilings | Sometimes used | Rare |
Tolerance of aluminum Base Plate vs. Pattern Height
Many bad suppliers cheat buyers by manipulating tolerances. When you buy aluminum tread plate, you must clearly understand the difference between Base Plate Thickness and Pattern Height.
If you order a "3.0 mm tread plate," a reliable factory means the flat base is 3.0 mm thick. A bad supplier might give you a 2.2 mm base plate plus a 0.8 mm pattern, calling it 3.0 mm. This makes the floor extremely weak.
At GNEE, we guarantee strict industrial tolerances:
| Parameter | GNEE Standard Tolerance | Why It Matters |
| Base Plate Thickness | ±0.05 mm to ±0.10 mm | Ensures the structural load-bearing capacity is exactly what your engineers calculated. |
| Pattern Height | 0.8 mm – 1.2 mm (Standard) | High patterns provide better grip. Low patterns wear out quickly under heavy boots. |
| Width & Length | ±1.0 mm | Ensures plates fit perfectly during vehicle assembly without gaps. |
| Flatness | ≤ 3 mm / meter | Prevents welding problems and uneven flooring. |
GNEE strictly separates base plate thickness and pattern height in our contracts. We supply full-thickness 5754 aluminum plates with certified pattern heights for maximum safety.
Contact Us to Get a Free Material Sample and Mill Test Certificate (MTC)
GNEE 5754 aluminium plate price
The price of 5754 aluminum tread plate is transparent and changes daily. It is based on this simple formula:
Final Price = SMM Aluminum Ingot Price + Embossing/Processing Fee + Shipping
Factors that change your final cost:
- Ingot Price: Daily market fluctuation.
- Thickness: Very thin plates (under 2mm) cost slightly more to process per ton.
- Pattern: Complex patterns or very high pattern requirements may increase the rolling fee.
- Order Volume: Full container loads (FCL) get the best factory-direct processing discounts.
Quality Inspection & Testing
Before any 5754 aluminum checker plate leaves the GNEE factory, it passes strict quality checks:
- Spectrometer Testing: To ensure the Magnesium content is correct for rust resistance.
- Tensile Testing: To confirm the yield strength meets structural flooring standards.
- Surface Inspection: Checking for oil stains, missing patterns, or edge cracks.
- Caliper Measurement: Strictly verifying the base plate thickness separate from the pattern height.
We provide a Mill Test Certificate (MTC) with every delivery. Third-party testing by SGS or BV is also fully supported.
Standard Packaging for Global Delivery
Aluminum tread plates are heavy and can be scratched easily if packed poorly. GNEE uses seaworthy export packaging to guarantee safe arrival:
- Bottom: Strong, fumigated wooden pallets designed for forklift handling.
- Moisture Protection: Plates are wrapped in high-density plastic film with desiccants to prevent ocean freight oxidation (white rust).
- Outer Protection: Covered in thick kraft paper and strapped securely with steel or heavy-duty plastic bands.
Note: We can apply PVC protective film to the flat side if your manufacturing process requires it.
Why Choose GNEE as Your Tread Plate Supplier?
GNEE is a trusted 5754 aluminum sheet supplier for commercial vehicle manufacturers and industrial engineering companies worldwide.
- True Customization: We accept mixed-size orders. You can buy 3mm plates for truck bodies and 5mm plates for stairs in the same container.
- Honest Specifications: We never compromise on base plate thickness. What you order is exactly what you receive.
- Large Production Capacity: Fast lead times for both standard sizes (4x8 ft) and custom-cut lengths.
- Rich Industry Knowledge: Our sales engineers understand commercial vehicle manufacturing and can recommend the exact temper and pattern you need.
Partner with GNEE for reliable, factory-direct 5754 aluminum tread plates. We promise honest tolerances, fast global shipping, and highly competitive pricing.
Send your inquiry today including:
Alloy & Temper (e.g., 5754 H111)
Dimensions (Base Thickness × Width × Length)
Pattern Type (e.g., 5-Bar)
Total Quantity
Our team will review your requirements and send a detailed quotation within 24 hours.
Contact GNEE Sales Team to Start Your Order
