Oct 11, 2025 Leave a message

EN 754 EN AW 5083-0 Seamless Pipe

EN-754-EN-AW-5083-0-Seamless-Pipe.pdf

5083 seamless tube is appropriate for use in process engineering, plant and equipment construction, and shipbuilding. Their low weight, excellent resistance to saltwater, and temperature range of -270°C to +80°C are their advantages.
The most well-known application for alloy 5083 is as a shipbuilding plate. Additionally, the alloy is made as forgings, extruded seamless tubes, and other extrusions.
Because of its small granular nature, anodizing it is simple and accurate. This alloy is substantially more corrosion resistant in maritime situations because of the inclusion of magnesium and other metals. Because of this characteristic, the alloy finds widespread usage in maritime applications.

Applications requiring more strength use the 5083 aluminum box pipes. Aluminum is not as strong as steel, but it may be made stronger by adding alloying ingredients and changing the alloy's form, but not as much as steel alloys. One of the strongest non-heat-treated aluminum alloys is EN AW-5083 Aluminum Pipe.
EN 754 EN AW 5083-0 Size range for seamless pipes: 1/2" to 12"

 

Grade: ENAW-AlMg4.5Mn0.7
Number: ENAW-5083
Classification: Aluminium – 5000 series (magnesium, Mg, is major alloying element)
Standard: EN 573-3: 2009 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
EN 755-2: 2008 Aluminium and aluminium alloys. Extruded rod/bar, tube, and profiles. Mechanical properties
EN 485-2: 2008 Aluminium and aluminium alloys. Sheet, strip, and plate. Mechanical properties
EN 754-2: 2008 Aluminium and aluminium alloys. Cold-drawn rod/bar and tube. Mechanical properties
EN 1592-2: 1998 Aluminium and aluminium alloys. HF seam-welded tubes. Mechanical properties
EN 603-2: 1997 Aluminium and aluminium alloys. Wrought forging stock. Mechanical properties
EN 941: 1996 Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications
EN 1386: 2007 Aluminium and aluminium alloys. Tread plate. Specifications
EN 12392: 2000 Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipment

 

EN AW-5083 Equivalent Grades

Note: Equivalent grades are for reference only. Exact equivalence depends on the applicable standard, product form, temper, and chemical/mechanical requirements.

Region / Standard Equivalent Grade / Designation
European Union / EN EN AW-5083 / EN AW-AlMg4.5Mn0.7
USA / UNS A95083 / UNS A95083
Germany / DIN / W.Nr. 3.3547 / AlMg4.5Mn
Japan / JIS 5083
France / AFNOR P-AlMg4.4
United Kingdom / BS 5083
Italy / UNI AlMg4.5Mn
Sweden / SS AlMg4.5Mn
Poland / PN 424415
Czech Republic / CSN AlMg4.5Mn
Austria / ÖNORM AlMg4.5Mn
International / ISO AlMg4.5Mn

 

Chemical composition % of grade ENAW-AlMg4.5Mn0.7 (EN AW-5083 )

Fe Si Mn Cr Ti Cu Mg Zn Others –
max 0.4 max 0.4 0.4 – 1 0.05 – 0.25 max 0.15 max 0.1 4 – 4.9 max 0.25 each 0.05; total 0.15 Al – remainder

 

Mechanical properties of grade ENAW-AlMg4.5Mn0.7 (EN AW-5083 )

Rm – Tensile strength (MPa) (H14) 340-400
Rm – Tensile strength (MPa) (F) 340-400
Rm – Tensile strength (MPa) (H112) 270

EN 754 EN AW 5083-0 Seamless Pipe

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry