1050 alloy belongs to the 1xxx series of aluminum and is called pure aluminum coils.
It is made from virgin aluminum ingots, which we can guarantee to be 99.5% pure, and not from aluminum scrap. Conditions H14 and H24 allow for 90-degree bends without cracking. Surface treatment: polished, blue PE film or paper lining.
What is 1050 aluminum coil? Introduction to aluminum coil 1050
The purity of 1050 aluminum coil is over 99.50%. 1050 aluminum coil is cheap, stable in quality and good in corrosion resistance. We are one of the best 1050 aluminum coil manufacturers in China. We have excellent quality, sturdy export packaging and stable quality. 1050 aluminum coil is the cheapest aluminum grade on the market.
1050 aluminum coil specifications
Aluminum alloy: 1050
Alloy name: AA1050-H14, A1050-H24, 1050A, Al99.5,
1050 aluminum coil status: O, H12, H14, H16, H18, H24, H26, H19
1050 aluminum coil thickness: 0.30mm-12.00mm
1050 aluminum coil width: 500mm-2600mm
Weight per roll: 1,000KGS to 5,000KGS, (ordinary roll weight: 2.5MT to 3.0MT)
Inner diameter: 20' or 505MM or 508mm, maximum outer diameter: 1800mm
Standards: GB/T 3880-2012, ASTM B209.
Provide 1050 aluminum strip, 1050 aluminum coil, 1050 aluminum coil
Aluminum Coil 1050 H14 Chemistry Composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
|---|---|---|---|---|---|---|---|---|---|---|
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | 99.5 |
Aluminum Coil 1050 Mechanical Properties & Features
| Aluminum Coil | Anti –tensile strength N/m㎡ | Elongation rate(%) | Hardness | Surface |
|---|---|---|---|---|
| 1050-O | 65 - 95Mpa | 35 | 19HB | Mill finish |
| 1050 H12 | 85 - 125Mpa | 18 | 23HB | Mill finish |
| 1050 H14 | 105 - 145Map | 7 | 26HB | Mill finish |
| 1050 H16 | 120 - 160Map | 4 | 30HB | Mill finish |
| 1050 H18 | above 140 Map | 2 | 35HB | Mill finish |
